Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Dell PowerEdge R440 1U rack server front view with four 3.5 inch drive bays

DELL

DELL PowerEdge R440 1U rack server 2x Xeon Gold 5118 2.3GHz 12-core 256GB DDR4 4x 4TB SAS H730P 2x 550W

SKU CH-7GX7-62V93

1U rack server with dual 12-core Xeon Gold 5118 processors, 256GB DDR4 ECC memory, H730P RAID controller, and four 4TB SAS drives

  • Dual 12-core Xeon Gold 5118 CPUs at 2.3 GHz base clock
  • 256 GB DDR4-2400 ECC registered memory across eight 32 GB modules
  • PERC H730P 2 GB controller with RAID 0/1/5/6/10/50/60 support
  • Four 3.5-inch 4 TB 7.2 K SAS enterprise hard drives
  • Dual 550 W platinum-efficiency power supplies with iDRAC 9 Express remote management

PowerEdge R440 1U Rack Server

The Dell PowerEdge R440 is a compact 1U rack server built for dense data-centre deployments. It ships with dual Intel Xeon Gold 5118 processors running at 2.3 GHz with 12 cores each and a 3.2 GHz turbo frequency. The system includes 256 GB of DDR4-2400 ECC registered memory across eight 32 GB modules.

Suits virtualisation hosts needing high core counts

This configuration targets workloads such as virtualisation, database serving and cloud infrastructure where core density and memory capacity matter. The four 3.5-inch drive bays limit internal storage expansion, so buyers who need more storage slots should consider a different chassis. The 1U height also restricts PCIe add-in cards to low-profile form factors.

PERC H730P RAID controller with 2 GB cache

The Dell PERC H730P provides hardware RAID 0, 1, 5, 6, 10, 50 and 60 plus pass-through mode, backed by a battery-protected 2 GB cache. It manages the four included 4 TB 7.2 K SAS drives at 12 Gb/s. This controller choice determines the RAID levels and drive-count ceiling for the server.

Kohokohdat

  • Dual 12-core Xeon Gold 5118 CPUs at 2.3 GHz base clock
  • 256 GB DDR4-2400 ECC registered memory across eight 32 GB modules
  • PERC H730P 2 GB controller with RAID 0/1/5/6/10/50/60 support
  • Four 3.5-inch 4 TB 7.2 K SAS enterprise hard drives
  • Dual 550 W platinum-efficiency power supplies with iDRAC 9 Express remote management

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

How do I verify the Xeon Gold 5118 processors are running at 2.3GHz base and 3.2GHz turbo after installation?

Enter the BIOS or iDRAC 9 Express interface during boot; both display the live clock speeds for each 12-core CPU so you can confirm 2.3GHz base and 3.2GHz turbo operation.

Which items ship with the R440 and which must be purchased separately?

Included: 2x Xeon Gold 5118 CPUs, 256GB DDR4-2400 ECC RDIMMs (8x 32GB), H730P RAID controller with battery, 4x 4TB 7.2K SAS 3.5" drives, dual 1GbE ports, iDRAC 9 Express, 2x 550W platinum PSUs. Not included: front bezel and Ready Rails.

Which RAID level should I choose on the H730P for four 4TB SAS drives?

The H730P supports RAID 0, 1, 5, 6, 10, 50 and 60; with four 4TB drives RAID 10 gives 8TB usable with full redundancy, while RAID 5 yields 12TB with single-drive fault tolerance.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.