Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 1U rack server with ten 2.5-inch drive bays visible on the front

DELL

DELL PowerEdge R630 10SFF 1x Xeon E5-2667v3 3.2GHz 384GB DDR4 No Drive

SKU CH-DFAP-W51N5

1U rack server with 10 2.5-inch bays, 384GB DDR4 ECC memory and a 3.2GHz Xeon E5-2667v3 processor, PERC H730 controller and dual 495W supplies

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed3.2GHz
  • # of Processors Installed1
  • MAX Processors2
  • Installed Memory Size384GB
  • 10 drive bays support flexible storage expansion
  • 2 GHz Xeon 8-core processor delivers strong compute performance
  • 384 GB DDR4 ECC memory handles demanding workloads
  • PERC H730 SAS controller enables hardware RAID
  • iDRAC8 Enterprise remote management simplifies server administration

Dell PowerEdge R630 10-bay server

This Dell PowerEdge R630 is a 1U rack server fitted with a single Intel Xeon E5-2667v3 processor running at 3.2 GHz and 384 GB of DDR4 ECC registered memory. It targets IT teams that need dense compute and large memory capacity for virtualisation, database or high-performance computing workloads in a compact form factor.

Installation notes

The chassis arrives with ten 2.5-inch drive bays, a PERC H730 SAS RAID controller and dual 495 W power supplies already installed, so adding storage or a second CPU is straightforward. Buyers must supply their own drives and rail kit; the iDRAC8 Enterprise licence is active for remote deployment and firmware updates.

Pre-purchase checks

Verify that your rack provides at least 36 inches of depth and can support the 40 lb weight, and confirm that the DDR4 registered DIMM population matches the 1.5 TB maximum if you plan further upgrades. Ensure the SATA or SAS drives you select are compatible with the H730 controller and that your network infrastructure can use the dual 10 GbE and dual 1 GbE ports.

Kohokohdat

  • 10 drive bays support flexible storage expansion
  • 2 GHz Xeon 8-core processor delivers strong compute performance
  • 384 GB DDR4 ECC memory handles demanding workloads
  • PERC H730 SAS controller enables hardware RAID
  • iDRAC8 Enterprise remote management simplifies server administration

Tekniset tiedot

BrandDELL
SeriesPowerEdge
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed3.2GHz
# of Processors Installed1
MAX Processors2
Installed Memory Size384GB
Memory TypeDDR4
Max Memory Capacity1.5TB
Hard Drive (Installed)7,68
Storage ControllerDell PERC H730 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 - Enterprise License
Dimensions36 x 24 x 10 in
Weight40

Kysymyksiä tästä tuotteesta

How can I verify the R630 is working as intended after setup?

Power on the server, watch the iDRAC8 Enterprise console for a clean POST, confirm the single Xeon E5-2667v3 at 3.2 GHz and all 384 GB DDR4 are detected, then run the built-in diagnostics from the lifecycle controller.

What comes in the box and what must I purchase separately?

The chassis includes one Xeon E5-2667v3, 384 GB DDR4 ECC registered memory, PERC H730 SAS controller, dual 495 W power supplies, Intel I350/X540 2×10 GbE + 2×1 GbE network card, and iDRAC8 Enterprise; drives and rail kit are not included.

Which drive-bay version should I choose for this R630?

This unit is the 10-bay 2.5" SFF chassis supporting up to ten SATA or SAS drives; select it when you need maximum density in a 1U rack form factor.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.