Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 1U rack server with ten 2.5 inch drive bays

DELL

DELL PowerEdge R630 10SFF 2× Xeon E5-2630 v4 2.2GHz 384GB DDR4 No Drive

SKU CH-R2S0-XHQ4E

Ten-bay 2.5-inch rack server with dual Xeon E5-2630 v4 2.2GHz processors and 384GB DDR4 memory, PERC H730 SAS controller, no drives installed

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.2GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size384GB
  • 10-bay 2.5″ chassis fits dense storage layouts
  • Dual Xeon E5-2630 v4 CPUs provide 10 cores each
  • 384 GB DDR4 ECC memory supports heavy workloads
  • PERC H730 RAID controller manages multiple drive arrays
  • iDRAC8 Enterprise enables full remote server control

Dell PowerEdge R630 10SFF dual Xeon server

The Dell PowerEdge R630 is a 1U rack-mount server fitted with two Intel Xeon E5-2630 v4 processors at 2.2 GHz and 384 GB of DDR4 ECC registered memory. Ten 2.5-inch drive bays connect through a PERC H730 SAS controller that supports SATA drives. Remote management is handled by iDRAC8 Enterprise.

Ideal for virtualisation hosts

This configuration suits buyers who need high core counts and large memory capacity in a compact rack footprint. Buyers who want drives pre-installed, a single-processor layout or a different drive bay count should look at other platforms.

384 GB DDR4 ECC registered memory installed

The system ships with 384 GB of DDR4 ECC registered RAM installed across the available slots. Maximum supported capacity reaches 1.5 TB, so the installed amount determines how much headroom remains for future upgrades.

Kohokohdat

  • 10-bay 2.5″ chassis fits dense storage layouts
  • Dual Xeon E5-2630 v4 CPUs provide 10 cores each
  • 384 GB DDR4 ECC memory supports heavy workloads
  • PERC H730 RAID controller manages multiple drive arrays
  • iDRAC8 Enterprise enables full remote server control

Tekniset tiedot

BrandDELL
SeriesPowerEdge
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.2GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size384GB
Memory TypeDDR4
Max Memory Capacity1.5TB
Hard Drive (Installed)4,00
Storage ControllerDell PERC H730 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 - Enterprise License
Dimensions36 x 24 x 10 in
Weight40

Kysymyksiä tästä tuotteesta

Does the PERC H730 controller require any specific cabling or backplane to use all ten 2.5-inch drive bays?

The chassis provides ten 2.5-inch bays wired to the PERC H730 SAS controller; no extra cabling is needed beyond the standard backplane that ships with the 10SFF configuration.

Can the integrated graphics and iDRAC8 Enterprise share the same network port as the Intel I350 or X540 adapters?

iDRAC8 Enterprise uses its own dedicated management port, leaving the four onboard data ports — two 10 GbE and two 1 GbE — fully available for operating-system traffic.

After power-on, which indicator confirms that both Xeon E5-2630 v4 processors and all 384 GB of DDR4 ECC memory have passed POST?

The front-panel LCD will display a clean POST code and the iDRAC8 dashboard will show two CPUs and 384 GB memory with zero correctable errors.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.