Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 2U rack server front panel with eight 2.5-inch drive bays and bezel

DELL

DELL PowerEdge R730 2U Rack Server 2× Xeon E5-2660 v3 2.6GHz 10-Core 512GB DDR4 8× 600GB SAS H730

SKU CH-RMY7-9V53Y

A 2U rack server with dual 10-core Xeon CPUs, 512 GB DDR4, eight 600 GB SAS drives on an H730 RAID controller, quad-port 1/10 GbE networking, iDRAC8 Enterprise and redundant 750 W power supplies

  • TypeRack
  • Rack Height2U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed2.60 GHz
  • CPU SocketLGA 2011-3

Installed Memory Size 512GB

HDD 8 x 600GB 10K SAS

  • Dual 10-core Xeon processors reach 3.3 GHz turbo for demanding workloads
  • 512 GB DDR4 registered ECC memory supports up to 1.5 TB capacity
  • PERC H730 1 GB controller enables RAID 0/1/5/6/10/50/60
  • Eight 600 GB 10K SAS drives deliver high-throughput storage
  • Quad-port 1 GbE and 10 GbE SFP+ plus iDRAC8 Enterprise remote management

Dual-socket Xeon 2U rack server

The Dell PowerEdge R730 is a 2U rack-mount server system equipped with two Intel Xeon E5-2660 v3 processors, each running at 2.6 GHz with 10 cores. It ships with 512 GB of DDR4 registered ECC memory across 16 DIMM slots and includes a PERC H730 1 GB RAID controller. Eight 2.5-inch drive bays are populated with 600 GB 10 K SAS hard drives, and dual 750 W redundant power supplies are installed.

Virtualisation and database workloads

This configuration suits environments that need high core counts and large memory capacity for virtualisation, database or high-performance computing tasks. The quad-port network daughter card provides two 1 GbE and two 10 Gb SFP+ connections, while iDRAC 8 Enterprise enables remote management. Buyers who require solid-state storage tiers or GPU-accelerated compute should consider other platforms.

24 DDR4 slots with 1.5 TB maximum

The server board offers 24 DDR4 memory slots and supports up to 1.5 TB of registered ECC memory, allowing substantial future expansion beyond the 512 GB installed. This ceiling is the key figure when planning memory-intensive deployments.

Kohokohdat

  • Dual 10-core Xeon processors reach 3.3 GHz turbo for demanding workloads
  • 512 GB DDR4 registered ECC memory supports up to 1.5 TB capacity
  • PERC H730 1 GB controller enables RAID 0/1/5/6/10/50/60
  • Eight 600 GB 10K SAS drives deliver high-throughput storage
  • Quad-port 1 GbE and 10 GbE SFP+ plus iDRAC8 Enterprise remote management

Tekniset tiedot

BrandDELL
SeriesPowerEdge R730
ModelR730
TypeRack
Rack Height2U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed2.60 GHz
CPU SocketLGA 2011-3
Number of CPU Cores10-Core Processor
# of Processors Installed2
MAX Processors2
ChipsetIntel C610
Installed Memory Size512GB
Memory TypeDDR4
Max Memory Capacity1.5TB
Number of Memory Slots24
Storage ControllerDell Perc H730 1GB Controller
HDD InterfaceSAS
SSD (Installed)No
Raid LevelRAID 0/1/5/6/10/50/60
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
LAN Ports4 x Ports
Expansion Slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management PortRJ 45
Operating SystemNo
Features8 x 2.5" SATA/SAS Hot-Plug Drive Bays

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does this server come with rails and power cables so I can mount it in my rack?

The system includes ready rails and a front bezel for rack mounting, plus two 750 Watt redundant hot-swap power supplies.

Will my existing 6 Gb/s SAS drives work with the PERC H730 controller?

The PERC H730 12 Gb/s SAS/SATA controller supports 6 Gb/s SAS and SATA drives in pass-through or RAID 0/1/5/6/10/50/60 modes.

How can I confirm the 512 GB DDR4 memory is recognised and running at 2133 MHz after installation?

Check the iDRAC8 Enterprise inventory and the BIOS memory configuration screen; both will show 16 × 32 GB modules at 2133 MHz.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.