Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

DELL

DELL PowerEdge R730 2U rack server 2x Xeon E5-2680 v4 2.4GHz 14-core 256GB DDR4 8x 2.4TB SAS H730

SKU CH-NRFW-3KGZ9

2U rack server with dual 14-core Xeon CPUs, 256GB DDR4 ECC memory, PERC H730 RAID controller, and eight 2.4TB SAS drives

  • TypeRack
  • Rack Height2U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed2.40 GHz
  • CPU SocketLGA 2011-3

Installed Memory Size 256GB

  • Dual 14-core Xeon processors deliver 28 threads for heavy workloads
  • 256GB DDR4 ECC memory supports large virtualisation clusters
  • PERC H730 controller enables RAID 0/1/5/6/10/50/60 with battery backup
  • Eight 2.4TB 10K SAS drives provide high-capacity low-latency storage
  • iDRAC 8 Enterprise gives full remote management over dedicated network

Dual-socket Xeon E5-2680 v4 server

This Dell PowerEdge R730 is a 2U rack server built around two Intel Xeon E5-2680 v4 processors. Each CPU provides 14 cores at 2.4 GHz with a 3.3 GHz turbo frequency. The system ships with 256 GB of DDR4 registered ECC memory across eight 32 GB modules. Eight 2.4 TB 10K SAS drives connect through a PERC H730 1 GB controller supporting RAID 0, 1, 5, 6, 10, 50 and 60. Dual 750 W platinum power supplies and iDRAC 8 Enterprise remote management complete the package.

Virtualisation and database workloads

The 28 total cores and large memory capacity suit virtualised environments, database servers and high-performance computing nodes. Quad-port networking with two 1 GbE and two 10 Gb SFP+ links handles heavy east-west traffic. Organisations that need GPU compute, more than 24 DIMM slots or a different drive interface should consider other platforms because the chassis provides eight 2.5-inch SAS bays and the memory controller is limited to DDR4.

PERC H730 RAID controller with 1 GB cache

The storage subsystem centres on the Dell PERC H730 controller with 1 GB of battery-backed cache. It manages the eight installed 2.4 TB SAS drives and supports pass-through mode for non-RAID configurations. This controller determines which RAID levels are available and whether the array can survive a power loss without data corruption. Buyers must confirm that the H730 feature set matches their redundancy and performance requirements before deployment.

Kohokohdat

  • Dual 14-core Xeon processors deliver 28 threads for heavy workloads
  • 256GB DDR4 ECC memory supports large virtualisation clusters
  • PERC H730 controller enables RAID 0/1/5/6/10/50/60 with battery backup
  • Eight 2.4TB 10K SAS drives provide high-capacity low-latency storage
  • iDRAC 8 Enterprise gives full remote management over dedicated network

Tekniset tiedot

BrandDELL
SeriesPowerEdge R730
ModelR730
TypeRack
Rack Height2U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed2.40 GHz
CPU SocketLGA 2011-3
Number of CPU Cores14-Core Processor
# of Processors Installed2
MAX Processors2
ChipsetIntel C610
Installed Memory Size256GB
Memory TypeDDR4
Max Memory Capacity1.5TB
Number of Memory Slots24
Storage ControllerDell Perc H730 1GB Controller
HDD InterfaceSAS
SSD (Installed)No
Raid LevelRAID 0/1/5/6/10/50/60
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
LAN Ports4 x Ports
Expansion Slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management PortRJ 45
Operating SystemNo
Features8 x 2.5" SATA/SAS Hot-Plug Drive Bays

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Do I need to populate all 24 DDR4 slots to reach the 1.5TB maximum memory capacity?

The 1.5TB maximum requires all 24 slots filled with compatible DDR4 registered ECC modules. The server currently has 8 slots occupied by 32GB modules totalling 256GB.

Will my existing 6Gb/s SAS drives work with the PERC H730 12Gb/s controller?

Yes, the PERC H730 supports both 12Gb/s and 6Gb/s SAS and SATA drives, so older drives will function at their native speed.

How can I verify the dual Xeon E5-2680 v4 processors are both recognised after installation?

Check the iDRAC8 Enterprise interface or the system BIOS; both will display two 14-core CPUs running at 2.40GHz with 3.3GHz turbo capability.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.