Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 2U rack server with front bezel, eight 2.5-inch drive bays and dual redundant power supplies

DELL

DELL PowerEdge R730 2U Rack Server 2x Xeon E5-2699 v3 2.3GHz 18-Core 64GB DDR4 8x 2.4TB SAS H730

SKU CH-W9BH-9YBCX

2U rack server with dual 18-core Xeon processors at 2.3 GHz, 64 GB DDR4 ECC memory, eight 2.4 TB SAS drives on a PERC H730 controller, quad-port 1/10 GbE networking, iDRAC8 Enterprise management.

  • TypeRack
  • Rack Height2U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed2.30 GHz
  • CPU SocketLGA 2011-3

Installed Memory Size 64GB

HDD 8 x 2.4TB 10K SAS

  • Dual 18-core Xeon CPUs handle heavy multi-threaded workloads
  • 64GB DDR4 ECC memory supports large virtualisation environments
  • H730 controller enables RAID 0/1/5/6/10/50/60 for data protection
  • Eight 2.4TB 10K SAS drives provide high-capacity enterprise storage
  • Quad-port 1GbE and 10Gb SFP+ networking meets diverse connectivity needs

Dual Xeon 18-core 2U rack server

The Dell PowerEdge R730 is a 2U rack-mount server system equipped with two Intel Xeon E5-2699 v3 processors running at 2.3 GHz with 18 cores each. It includes 64 GB of DDR4 2133 MHz registered ECC memory across four modules. Eight 2.4 TB 10K SAS hard drives connect through a PERC H730 1 GB RAID controller supporting RAID 0, 1, 5, 6, 10, 50 and 60.

Virtualisation hosts needing dense SAS capacity

This server suits environments that run virtualised workloads, databases or high-performance computing nodes where dual-socket compute density and large SAS storage pools are required. The quad-port network daughter card provides two 1 GbE and two 10 Gb SFP+ links. Buyers who need solid-state primary storage or more than 24 DIMM slots should evaluate other platforms.

PERC H730 RAID controller with 1 GB cache

The installed Dell PERC H730 12 Gb/s SAS/SATA controller with battery-backed 1 GB cache determines which drive configurations and RAID levels are possible. It manages the eight 2.5-inch drive bays and supports pass-through mode for non-RAID use. Confirm that this controller matches your storage topology before purchase.

Kohokohdat

  • Dual 18-core Xeon CPUs handle heavy multi-threaded workloads
  • 64GB DDR4 ECC memory supports large virtualisation environments
  • H730 controller enables RAID 0/1/5/6/10/50/60 for data protection
  • Eight 2.4TB 10K SAS drives provide high-capacity enterprise storage
  • Quad-port 1GbE and 10Gb SFP+ networking meets diverse connectivity needs

Tekniset tiedot

BrandDELL
SeriesPowerEdge R730
ModelR730
TypeRack
Rack Height2U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed2.30 GHz
CPU SocketLGA 2011-3
Number of CPU Cores18-Core Processor
# of Processors Installed2
MAX Processors2
ChipsetIntel C610
Installed Memory Size64GB
Memory TypeDDR4
Max Memory Capacity1.5TB
Number of Memory Slots24
Storage ControllerDell Perc H730 1GB Controller
HDD InterfaceSAS
SSD (Installed)No
Raid LevelRAID 0/1/5/6/10/50/60
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
LAN Ports4 x Ports
Expansion Slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management PortRJ 45
Operating SystemNo
Features8 x 2.5" SATA/SAS Hot-Plug Drive Bays

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the E5-2699 v3 CPUs and DDR4 memory fit my existing LGA 2011-3 rack chassis?

The server uses two LGA 2011-3 sockets and 2133 MHz DDR4 registered ECC modules, so it matches chassis and memory built for that platform.

How can I confirm the PERC H730 controller sees all eight 2.4 TB SAS drives after first boot?

Open the controller BIOS during POST or log into iDRAC8 Enterprise; both will list each 2.4 TB 10K SAS drive and the RAID virtual disks you created.

Which items ship inside the 2U box and what must I source separately?

The unit includes the motherboard, two CPUs, four 16 GB DDR4 DIMMs, H730 controller, eight 2.4 TB SAS drives, X520/I350 quad-port card, iDRAC8 Enterprise, two 750 W PSUs, bezel and rails; SFP+ transceivers and cables for 10 GbE links are not included.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.