Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver rack-mount server chassis with eight 3.5-inch drive bays visible

DELL

DELL PowerEdge R730 8LFF 2x Xeon E5-2630 v3 384GB DDR4 No Drive Rack Server

SKU CH-XDNS-FVHRH

A 2U rack server with eight 3.5-inch drive bays, dual Xeon E5-2630 v3 processors at 2.4GHz and 384GB DDR4 ECC memory, ready for custom storage

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.4GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size384GB
  • Dual Xeon E5-2630 v3 CPUs deliver 16 cores for multi-threaded workloads
  • 384GB DDR4 ECC memory supports large virtualisation clusters
  • PERC H730 RAID controller enables hardware SAS and SATA arrays
  • Eight 3.5-inch drive bays provide high-density local storage capacity
  • iDRAC8 Enterprise remote management allows out-of-band server administration

Dell PowerEdge R730 8-Bay Server

The Dell PowerEdge R730 is a 2U rack server with eight 3.5-inch drive bays, dual Intel Xeon E5-2630 v3 processors running at 2.4GHz, and 384GB of DDR4 ECC registered memory. It ships with a PERC H730 SAS RAID controller, dual 495W power supplies, and an iDRAC8 Enterprise licence for remote management. No hard drives are included.

Ideal for virtualisation hosts

This configuration suits buyers who need dense 3.5-inch storage capacity and high memory density in a 2U form factor. It is not for buyers who require more than two sockets, more than 768GB of RAM, or a GPU-ready chassis because the system maxes out at two processors and integrated graphics only.

PERC H730 SAS controller with eight 3.5-inch bays

The storage subsystem centres on a Dell PERC H730 SAS controller that manages up to eight 3.5-inch SATA or SAS drives in the front bays. This single specification determines whether the server can meet your drive-count and RAID-level requirements.

Kohokohdat

  • Dual Xeon E5-2630 v3 CPUs deliver 16 cores for multi-threaded workloads
  • 384GB DDR4 ECC memory supports large virtualisation clusters
  • PERC H730 RAID controller enables hardware SAS and SATA arrays
  • Eight 3.5-inch drive bays provide high-density local storage capacity
  • iDRAC8 Enterprise remote management allows out-of-band server administration

Tekniset tiedot

BrandDELL
SeriesPowerEdge
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.4GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size384GB
Memory TypeDDR4
Max Memory Capacity768GB
Hard Drive (Installed)16,00
Storage ControllerDell PERC H730 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 - Enterprise License
Dimensions36 x 24 x 10 in
Weight40

Kysymyksiä tästä tuotteesta

What hard drives do I need to add so the 8-bay chassis and PERC H730 controller can present storage to the operating system?

The server has eight 3.5-inch bays wired to the PERC H730 SAS controller; populate them with SATA hard drives or SAS drives to create RAID volumes for the OS and data.

Will my existing SATA SSDs work in the drive bays alongside the PERC H730 RAID controller?

Yes, the bays accept SATA SSDs and the PERC H730 manages them in any supported RAID level alongside mechanical drives.

How can I confirm the 384 GB of DDR4 ECC registered memory is recognised and error-free after the first boot?

Open the iDRAC8 Enterprise interface or watch the POST screen; both will display 384 GB installed and report no correctable or uncorrectable memory errors.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.