Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rack-mount server chassis, matte black front with eight 3.5-inch drive bays

DELL

DELL PowerEdge R730 8x3.5" 1x Xeon E5-2680 v3 256GB DDR4 No Drive

SKU CH-4GRX-FWCAW

2U rack server with 8 large-form-factor drive bays, one 12-core Xeon at 2.5 GHz and 256 GB DDR4 ECC memory

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.5GHz
  • # of Processors Installed1
  • MAX Processors2
  • Installed Memory Size256GB
  • 12-core Xeon E5-2680 v3 at 2.5 GHz for compute-intensive workloads
  • 256 GB DDR4 ECC registered memory supports large datasets
  • 8 x 3.5" drive bays with PERC H730 SAS controller for flexible storage
  • iDRAC8 Enterprise remote management simplifies server administration
  • Dual 495 W power supplies provide redundancy for continuous operation

Dell PowerEdge R730 8-bay server

The Dell PowerEdge R730 is a 2U rack-mount server built for data-centre workloads. It ships with one Intel Xeon E5-2680 v3 processor running at 2.5 GHz and 256 GB of DDR4 ECC registered memory. The chassis provides eight 3.5-inch drive bays and includes a PERC H730 SAS RAID controller for storage redundancy. Remote management is handled by iDRAC8 with an Enterprise licence.

Ideal for virtualisation hosts and database nodes

This configuration suits teams that need a second CPU socket for future growth and a large memory footprint today. Buyers who want more storage bays than eight or who require 2.5-inch drive support should look at a different chassis. Organisations needing a single-socket platform with lower power draw will find this system oversized.

Eight 3.5-inch drive bays with PERC H730

The eight-bay 3.5-inch backplane paired with the PERC H730 controller determines how many spinning disks or SATA SSDs you can install and what RAID levels are available. Verify that the bay count and controller match your capacity and redundancy plan before ordering.

Kohokohdat

  • 12-core Xeon E5-2680 v3 at 2.5 GHz for compute-intensive workloads
  • 256 GB DDR4 ECC registered memory supports large datasets
  • 8 x 3.5" drive bays with PERC H730 SAS controller for flexible storage
  • iDRAC8 Enterprise remote management simplifies server administration
  • Dual 495 W power supplies provide redundancy for continuous operation

Tekniset tiedot

BrandDELL
SeriesPowerEdge
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.5GHz
# of Processors Installed1
MAX Processors2
Installed Memory Size256GB
Memory TypeDDR4
Max Memory Capacity768GB
Hard Drive (Installed)20,00
Storage ControllerDell PERC H730 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 - Enterprise License
Dimensions36 x 24 x 10 in
Weight40

Kysymyksiä tästä tuotteesta

What rack depth does the 36 x 24 x 10 in chassis require?

The unit measures 36 inches deep so a rack with at least 36 inches of usable depth is needed.

How do I seat the PERC H730 RAID controller and its cables during install?

Insert the controller into the dedicated internal slot, connect the SAS cables to the backplane, then attach the battery module before closing the lid.

When will the 495 W power supplies need replacement?

Plan to swap the redundant 495 W units after several years of continuous duty or if a supply reports a fault via iDRAC.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.