Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 2U rack server with twelve 3.5-inch drive bays and front bezel

DELL

DELL PowerEdge R730xd 12 Bay 3.5" 2U rack server 2x Xeon E5-2680 v3 2.5GHz 12 Core 64GB DDR4

SKU CH-BR70-1P5S4

12-bay 2U rack server with dual 12-core Xeon processors, 64 GB DDR4 ECC memory, PERC H730 RAID controller, quad-port 1/10 GbE networking and redundant 750 W power supplies

  • TypeRack
  • Rack Height2U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed2.5 GHz
  • CPU SocketLGA 2011-3
  • 24 cores at 2.5 GHz base / 3.3 GHz turbo for demanding workloads
  • 64 GB DDR4 2133 MHz ECC memory supports up to 1.5 TB capacity
  • PERC H730 1 GB controller enables RAID 0/1/5/6/10/50/60
  • 12 front 3.5" SAS/SATA trays for high-density local storage
  • Dual 750 W platinum PSUs plus iDRAC8 Enterprise for resilient management

Dual-socket Xeon rack server for storage-intensive

The Dell PowerEdge R730xd is a 2U rack system built around two Intel Xeon E5-2680 v3 processors running at 2.5 GHz with a 3.3 GHz turbo. Twenty-four DIMM slots hold 64 GB of DDR4-2133 registered ECC memory, expandable to 1.5 TB. A PERC H730 1 GB controller manages up to twelve 3.5-inch SATA or SAS drives in hot-swap trays.

Suits buyers needing dense local storage

This chassis fits workloads that demand twelve drive bays, hardware RAID 0/1/5/6/10/50/60 and quad-port networking with two 1 GbE and two 10 Gb SFP+ ports. iDRAC 8 Enterprise provides full remote management. Builders who need a different drive form factor, more than two sockets or a newer CPU generation should evaluate alternative platforms.

Twelve 3.5-inch hot-swap bays with PERC H730 RAID

The single specification that decides fit is the twelve-bay 3.5-inch backplane paired with the H730 controller supporting RAID levels up to 60. If the deployment requires that exact bay count and RAID capability in a 2U rack, this server matches; otherwise a different chassis or controller is required.

Kohokohdat

  • 24 cores at 2.5 GHz base / 3.3 GHz turbo for demanding workloads
  • 64 GB DDR4 2133 MHz ECC memory supports up to 1.5 TB capacity
  • PERC H730 1 GB controller enables RAID 0/1/5/6/10/50/60
  • 12 front 3.5" SAS/SATA trays for high-density local storage
  • Dual 750 W platinum PSUs plus iDRAC8 Enterprise for resilient management

Tekniset tiedot

BrandDELL
SeriesPowerEdge R730XD
ModelR730xd
TypeRack
Rack Height2U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed2.5 GHz
CPU SocketLGA 2011-3
Number of CPU Cores12-Core Processor
# of Processors Installed2
MAX Processors2
ChipsetIntel C610
Installed Memory Size64GB
Memory TypeDDR4
Max Memory Capacity1.5TB
Number of Memory Slots24
Storage ControllerDell Perc H730 1GB Controller
HDD InterfaceSATA/SAS
SSD (Installed)No
Raid LevelRAID 0/1/5/6/10/50/60
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
LAN Ports4 x Ports
Expansion Slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management PortRJ 45
Operating SystemNo
Features12 x 3.5" SATA/SAS Hot-Plug Drive Bays

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What drives do I need to populate the 12 x 3.5" bays?

The bays accept 3.5" SATA or SAS hard drives or SSDs; no drives are included so you must supply them.

Will my existing PERC H730 RAID configuration import without rebuild?

The onboard PERC H730 1GB controller supports RAID 0/1/5/6/10/50/60 and pass-through, so a foreign-config import will recognise the array.

How do I confirm the iDRAC8 Enterprise remote console is active after first boot?

Attach a monitor, enter the iDRAC setup at POST, verify the network settings, then open the web interface to see the virtual console.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.