Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 2U rack server with front bezel and twenty-four 2.5-inch drive bays

DELL

DELL PowerEdge R730xd 24 Bay 2.5" 2U Rack Server 2x Xeon E5-2683 v4 2.1GHz 16 Core 256GB DDR4

SKU CH-HFK4-ZCB2F

2U rack server with 24 2.5" bays, dual 16-core Xeon processors at 2.1GHz, 256GB DDR4 ECC memory, H730 RAID controller, dual 10GbE SFP+ networking and redundant 750W power supplies

  • TypeRack
  • Rack Height2U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed2.10 GHz
  • CPU SocketLGA 2011-3

Installed Memory Size 256GB

HDD 2 x 300GB 10K SAS

  • Dual 16-core Xeon CPUs deliver 32 total cores for heavy multi-threaded workloads
  • 256 GB DDR4 ECC memory supports large virtualisation and database footprints
  • PERC H730 controller enables RAID 0/1/5/6/10/50/60 for flexible data protection
  • Quad-port X520/I350 card provides 2×1 GbE and 2×10 Gb SFP+ connectivity
  • Dual 750 W platinum PSUs with hot-swap redundancy keep the 2U server running

24-Bay 2.5" 2U Rack Server

The Dell PowerEdge R730xd is a 2U rack server that fits twenty-four 2.5-inch drive bays for dense local storage. Dual Intel Xeon E5-2683 v4 processors provide 32 total cores at 2.1 GHz with 3.0 GHz turbo. Two hundred fifty-six gigabytes of DDR4 registered ECC memory populate eight of the twenty-four DIMM slots. A PERC H730 controller with 1 GB cache manages RAID across SAS and SATA drives.

Ideal for storage-heavy workloads

This configuration suits databases, virtual desktop infrastructure and data-warehouse nodes that benefit from high drive count and large memory capacity. The quad-port network daughter card adds two 1 GbE and two 10 Gb SFP+ links for flexible connectivity. Buyers who need solid-state boot drives or more than two processors should consider other platforms.

PERC H730 RAID controller with 1 GB cache

The installed H730 handles RAID 0, 1, 5, 6, 10, 50 and 60 plus pass-through mode on a 12 Gb/s SAS/SATA bus. It determines which drive types and RAID levels are supported without an additional controller purchase.

Kohokohdat

  • Dual 16-core Xeon CPUs deliver 32 total cores for heavy multi-threaded workloads
  • 256 GB DDR4 ECC memory supports large virtualisation and database footprints
  • PERC H730 controller enables RAID 0/1/5/6/10/50/60 for flexible data protection
  • Quad-port X520/I350 card provides 2×1 GbE and 2×10 Gb SFP+ connectivity
  • Dual 750 W platinum PSUs with hot-swap redundancy keep the 2U server running

Tekniset tiedot

BrandDELL
SeriesPowerEdge R730XD
ModelR730xd
TypeRack
Rack Height2U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed2.10 GHz
CPU SocketLGA 2011-3
Number of CPU Cores16-Core Processor
# of Processors Installed2
MAX Processors2
ChipsetIntel C610
Installed Memory Size256GB
Memory TypeDDR4
Max Memory Capacity1.5TB
Number of Memory Slots24
Storage ControllerDell Perc H730 1GB Controller
HDD InterfaceSAS
SSD (Installed)No
Raid LevelRAID 0/1/5/6/10/50/60
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
LAN Ports4 x Ports
Expansion Slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management PortRJ 45
Operating SystemNo
Features24 x 2.5" SATA/SAS Hot-Plug Drive Bays

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the server boot without me adding any drives beyond the two 300 GB SAS disks that are already installed?

Yes — the PERC H730 controller and the two 300 GB 10 K SAS drives are pre-installed, so the system can boot and run an OS immediately.

Can I keep using my existing 6 Gb/s SAS or SATA drives in the remaining bays alongside the 12 Gb/s backplane?

The H730 controller supports both 12 Gb/s and 6 Gb/s SAS and SATA drives, so older drives will work in the empty 2.5" bays at their native speed.

How do I confirm the 256 GB of DDR4-2400 ECC memory is recognised and healthy after first power-on?

Open the iDRAC8 Enterprise web interface or watch the POST screen; both will show 256 GB detected across 24 slots with ECC status reported as OK.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.