Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 2U rack server front with 24 drive bays and bezel

DELL

DELL PowerEdge R730xd 2U rack server 2× Xeon E5-2660 v3 2.6GHz 10-core 64GB DDR4 24× 400GB SSD H730

SKU CH-7KWJ-0SD8G

2U rack server with dual 10-core Xeon processors at 2.6 GHz, 64 GB DDR4 memory, 24 × 400 GB SATA SSDs and PERC H730 RAID controller

  • TypeRack
  • Rack Height2U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed2.60 GHz
  • CPU SocketLGA 2011-3
  • Dual 10-core Xeon E5-2660 v3 at 2.6 GHz with 3.3 GHz turbo for heavy compute
  • 64 GB DDR4 2133 MHz registered ECC memory expandable to 1.5 TB
  • 24 × 400 GB SATA SSDs on PERC H730 1 GB controller supporting RAID 0/1/5/6/10/50/60
  • Quad-port networking with 2 × 1 GbE and 2 × 10 Gb SFP+ via Intel X520/I350
  • iDRAC 8 Enterprise remote management plus dual 750 W platinum hot-swap PSUs for uptime

Dual Xeon E5-2660 v3 2U Server

This 2U rack server ships with two Intel Xeon E5-2660 v3 processors, each running at 2.6 GHz with ten cores. It includes 64 GB of DDR4 registered ECC memory across four 16 GB modules. The system targets midsize and large enterprises running data warehouses, e-commerce platforms, virtual desktop infrastructure or high-performance computing data nodes.

SATA SSD Storage and Controller Limits

Twenty-four 400 GB SATA solid-state drives connect through a Dell PERC H730 controller with 1 GB cache and battery backup. The controller supports RAID 0, 1, 5, 6, 10, 50 and 60 plus pass-through mode. All drives use the SATA 6 Gb/s interface and occupy the 2.5-inch front bays.

1.5 TB Maximum Memory Capacity

The platform provides twenty-four DDR4 memory slots and supports up to 1.5 TB of registered ECC memory. The installed 64 GB configuration leaves twenty slots available for expansion. Buyers who need more memory than 1.5 TB must choose a different server platform.

Kohokohdat

  • Dual 10-core Xeon E5-2660 v3 at 2.6 GHz with 3.3 GHz turbo for heavy compute
  • 64 GB DDR4 2133 MHz registered ECC memory expandable to 1.5 TB
  • 24 × 400 GB SATA SSDs on PERC H730 1 GB controller supporting RAID 0/1/5/6/10/50/60
  • Quad-port networking with 2 × 1 GbE and 2 × 10 Gb SFP+ via Intel X520/I350
  • iDRAC 8 Enterprise remote management plus dual 750 W platinum hot-swap PSUs for uptime

Tekniset tiedot

BrandDELL
SeriesPowerEdge R730XD
ModelR730xd
TypeRack
Rack Height2U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed2.60 GHz
CPU SocketLGA 2011-3
Number of CPU Cores10-Core Processor
# of Processors Installed2
MAX Processors2
ChipsetIntel C610
Installed Memory Size64GB
Memory TypeDDR4
Max Memory Capacity1.5TB
Number of Memory Slots24
Storage ControllerDell Perc H730 1GB Controller
HDD InterfaceSATA
SSD (Installed)24 x 400GB SATA SSD
Raid LevelRAID 0/1/5/6/10/50/60
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
LAN Ports4 x Ports
Expansion Slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management PortRJ 45
Operating SystemNo
Features24 x 2.5" SATA/SAS Hot-Plug Drive Bays

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Should I pick the 24-bay 2.5-inch model or a smaller chassis for this server?

The R730xd is a 2U rack server with 24 front-accessible 2.5-inch drive bays; choose it when you need maximum SSD density in a compact rack footprint.

What does the 2.6 GHz Xeon speed deliver in a live workload?

Each E5-2660 v3 runs at 2.6 GHz base with 3.3 GHz turbo across 10 cores, giving 20 total threads for databases, virtualization or HPC tasks.

How does the PERC H730 controller limit real-world throughput?

The H730 12 Gb/s SAS/SATA controller supports RAID 0, 1, 5, 6, 10, 50 and 60, so 24 SATA SSDs are capped by the 6 Gb/s drive link and the controller's 1 GB cache.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.