Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

DELL

DELL PowerEdge R730xd 2U rack server 2× Xeon E5-2699 v4 2.2GHz 22-core 512GB DDR4 12× 3.5" trays H730

SKU CH-C2G7-EZK67

2U rack server with dual 22-core Xeon CPUs at 2.2 GHz, 512 GB DDR4 ECC memory, H730 RAID controller and twelve 3.5-inch drive trays

  • TypeRack
  • Rack Height2U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed2.20 GHz
  • CPU SocketLGA 2011-3
  • Dual 22-core Xeon processors at 2.2 GHz handle heavy parallel workloads
  • 512 GB DDR4 registered ECC memory supports large in-memory databases
  • PERC H730 controller with battery enables RAID 0/1/5/6/10/50/60
  • Twelve 3.5-inch SAS/SATA trays provide high-capacity local storage
  • iDRAC8 Enterprise plus quad-port 1 GbE and 10 Gb SFP+ networking

Dense 2U Storage Server

The Dell PowerEdge R730xd is a 2U rack server built for storage-heavy workloads. Two Xeon E5-2699 v4 processors deliver 44 cores at 2.2 GHz with 3.6 GHz turbo. 512 GB of DDR4 registered ECC memory occupies 16 of 24 slots. The PERC H730 controller manages 12 front-access 3.5-inch SAS/SATA trays.

Virtualisation Hosts Not Needing PCIe Slots

This configuration suits teams running databases, VDI or HPC data nodes that prioritise internal drive count over expansion cards. The quad-port X520/I350 daughter card supplies two 10 Gb SFP+ and two 1 GbE links. Dual 750 W platinum supplies and iDRAC8 Enterprise simplify remote operations. Buyers needing GPU acceleration, more PCIe slots or a smaller 1U footprint should look elsewhere.

Twelve 3.5-Inch Drive Bays

The single specification that decides fit is the 12-bay 3.5-inch chassis. Each tray accepts SAS or SATA hard drives or SSDs with no drives included. Maximum memory reaches 1.5 TB across 24 DDR4 slots when the workload grows.

Kohokohdat

  • Dual 22-core Xeon processors at 2.2 GHz handle heavy parallel workloads
  • 512 GB DDR4 registered ECC memory supports large in-memory databases
  • PERC H730 controller with battery enables RAID 0/1/5/6/10/50/60
  • Twelve 3.5-inch SAS/SATA trays provide high-capacity local storage
  • iDRAC8 Enterprise plus quad-port 1 GbE and 10 Gb SFP+ networking

Tekniset tiedot

BrandDELL
SeriesPowerEdge R730XD
ModelR730xd
TypeRack
Rack Height2U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed2.20 GHz
CPU SocketLGA 2011-3
Number of CPU Cores22-Core Processor
# of Processors Installed2
MAX Processors2
ChipsetIntel C610
Installed Memory Size512GB
Memory TypeDDR4
Max Memory Capacity1.5TB
Number of Memory Slots24
Storage ControllerDell Perc H730 1GB Controller
HDD InterfaceSATA/SAS
SSD (Installed)No
Raid LevelRAID 0/1/5/6/10/50/60
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
LAN Ports4 x Ports
Expansion Slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management PortRJ 45
Operating SystemNo
Features12 x 3.5" SATA/SAS Hot-Plug Drive Bays

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What type and speed of DDR4 memory must already be installed to reach the 512 GB capacity?

The system uses 16 registered ECC DDR4 modules at 2400 MHz, each 32 GB, filling 16 of the 24 available slots to provide 512 GB total.

Will the PERC H730 controller and 3.5-inch trays accept the SAS and SATA drives I already own?

Yes, the H730 1 GB controller supports SAS and SATA drives in RAID 0, 1, 5, 6, 10, 50, 60 and pass-through, and the 12 trays fit 3.5-inch SAS or SATA drives.

How can I confirm the X520/I350 network card is operating at 10 Gb SFP+ speeds after installation?

Connect SFP+ transceivers and cables, then verify the link shows 10 GbE in the OS network settings or in iDRAC 8 Enterprise interface.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.