Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 2U rack server with twelve 3.5-inch drive trays and front bezel

DELL

DELL PowerEdge R730xd 2U rack server 2x Xeon E5-2680 v3 2.5GHz 12-core 256GB DDR4 H730 12x 3.5" trays

SKU CH-VRTW-8A7NK

2U rack server with dual 12-core Xeon processors at 2.5 GHz, 256 GB DDR4 ECC memory, H730 RAID controller, twelve 3.5-inch drive trays, quad-port 1 GbE and 10 GbE networking.

  • TypeRack
  • Rack Height2U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed2.5 GHz
  • CPU SocketLGA 2011-3
  • Dual 12-core Xeon processors reach 3.3GHz turbo for heavy compute
  • 256GB DDR4 2133MHz registered ECC memory scales to 1.5TB capacity
  • PERC H730 1GB controller supports RAID 0/1/5/6/10/50/60 with battery backup
  • 12 hot-swap 3.5-inch SAS/SATA trays plus quad-port 1GbE and 10Gb SFP+ networking
  • iDRAC8 Enterprise remote management with dual 750W platinum power supplies and rails included

Dense 2U rack server for storage-heavy workloads

The Dell PowerEdge R730xd is a 2U rack server built around two Intel Xeon E5-2680 v3 processors, each running at 2.5 GHz with 12 cores. It ships with 256 GB of DDR4 registered ECC memory across 24 slots and a PERC H730 storage controller supporting RAID 0, 1, 5, 6, 10, 50 and 60. Twelve 3.5-inch hot-swap trays accept SATA or SAS drives, while dual 750 W platinum power supplies and iDRAC8 Enterprise provide redundancy and remote management.

Suits storage-dense compute.

This server suits organisations that need high internal storage capacity with twelve 3.5-inch bays and quad-port 1 GbE plus 10 Gb SFP+ networking. Buyers who require GPU acceleration or extensive PCIe expansion beyond the storage controller and network daughter card should evaluate alternative platforms.

Twelve 3.5-inch drive bays define the storage

The single specification that decides fit is the twelve 3.5-inch SAS/SATA trays: they set the maximum raw capacity and drive count available without external enclosures. If your workload demands more bays or a different form factor, this chassis will not meet the requirement.

Kohokohdat

  • Dual 12-core Xeon processors reach 3.3GHz turbo for heavy compute
  • 256GB DDR4 2133MHz registered ECC memory scales to 1.5TB capacity
  • PERC H730 1GB controller supports RAID 0/1/5/6/10/50/60 with battery backup
  • 12 hot-swap 3.5-inch SAS/SATA trays plus quad-port 1GbE and 10Gb SFP+ networking
  • iDRAC8 Enterprise remote management with dual 750W platinum power supplies and rails included

Tekniset tiedot

BrandDELL
SeriesPowerEdge R730XD
ModelR730xd
TypeRack
Rack Height2U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed2.5 GHz
CPU SocketLGA 2011-3
Number of CPU Cores12-Core Processor
# of Processors Installed2
MAX Processors2
ChipsetIntel C610
Installed Memory Size256GB
Memory TypeDDR4
Max Memory Capacity1.5TB
Number of Memory Slots24
Storage ControllerDell Perc H730 1GB Controller
HDD InterfaceSATA/SAS
SSD (Installed)No
Raid LevelRAID 0/1/5/6/10/50/60
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
LAN Ports4 x Ports
Expansion Slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management PortRJ 45
Operating SystemNo
Features12 x 3.5" SATA/SAS Hot-Plug Drive Bays

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the R730xd accept the DDR4 RDIMMs I already own for my older Dell servers?

The system has 24 DDR4 slots and currently holds eight 32 GB modules at 2133 MHz; any registered ECC DDR4 within that speed range will install and run.

How can I confirm the PERC H730 controller and both Xeon E5-2680 v3 CPUs are recognised after first boot?

Open the iDRAC8 Enterprise interface or enter the BIOS; both processors will show as 12-core at 2.5 GHz with 3.3 GHz turbo, and the H730 will appear with its 1 GB cache and battery.

Which items ship with the server and what must I source separately?

Included are 12 x 3.5" SAS/SATA trays, ready rails, front bezel, dual 750 W platinum PSUs and the quad-port X520/I350 network card; hard drives are not supplied.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.