Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

DELL

DELL PowerEdge R730xd 2U rack server 2x Xeon E5-2680 v4 2.4GHz 14-core 768GB DDR4 12x 4TB HDD H730

SKU CH-37KN-CPA01

2U rack server with dual 14-core Xeon processors at 2.4GHz, 768GB DDR4 ECC memory, 12-bay 3.5-inch storage holding 12x 4TB SATA drives, PERC H730 RAID controller.

  • TypeRack
  • Rack Height2U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed2.40 GHz
  • CPU SocketLGA 2011-3
  • Dual 14-core Xeon E5-2680 v4 at 2.4 GHz base and 3.3 GHz turbo for heavy compute
  • 768 GB DDR4 ECC across 24 slots scales to 1.5 TB for large datasets
  • PERC H730 1 GB cache enables RAID 0/1/5/6/10/50/60 with battery backup
  • Twelve 4 TB 7.2 K SATA drives deliver high-capacity local storage
  • iDRAC8 Enterprise plus quad-port 1 GbE / 10 Gb SFP+ for remote management and fast networking

Dense 2U storage server

The Dell PowerEdge R730xd packs twelve 3.5-inch drive bays and dual 14-core Xeon processors into a 2U rack chassis. It targets organisations that need high local capacity for databases, virtual desktop infrastructure or data-warehouse workloads without expanding to a larger rack footprint.

SATA throughput ceiling

Each of the twelve installed 4 TB drives connects through a 6 Gb/s SATA link to the PERC H730 controller, so sustained array performance is bounded by the SATA interface rather than the controller’s 12 Gb/s SAS capability. The H730 supports RAID 0, 1, 5, 6, 10, 50 and 60, but the drives themselves set the practical bandwidth limit.

768 GB DDR4 registered ECC

Twenty-four 32 GB DDR4 2400 MHz RDIMMs fill every memory slot, reaching half the 1.5 TB maximum the C610 chipset allows. Buyers who need more than 768 GB must replace modules rather than add them, and the board accepts only DDR4 registered ECC memory.

Kohokohdat

  • Dual 14-core Xeon E5-2680 v4 at 2.4 GHz base and 3.3 GHz turbo for heavy compute
  • 768 GB DDR4 ECC across 24 slots scales to 1.5 TB for large datasets
  • PERC H730 1 GB cache enables RAID 0/1/5/6/10/50/60 with battery backup
  • Twelve 4 TB 7.2 K SATA drives deliver high-capacity local storage
  • iDRAC8 Enterprise plus quad-port 1 GbE / 10 Gb SFP+ for remote management and fast networking

Tekniset tiedot

BrandDELL
SeriesPowerEdge R730XD
ModelR730xd
TypeRack
Rack Height2U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed2.40 GHz
CPU SocketLGA 2011-3
Number of CPU Cores14-Core Processor
# of Processors Installed2
MAX Processors2
ChipsetIntel C610
Installed Memory Size768GB
Memory TypeDDR4
Max Memory Capacity1.5TB
Number of Memory Slots24
Storage ControllerDell Perc H730 1GB Controller
HDD InterfaceSATA
SSD (Installed)No
Raid LevelRAID 0/1/5/6/10/50/60
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
LAN Ports4 x Ports
Expansion Slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management PortRJ 45
Operating SystemNo
Features12 x 3.5" SATA/SAS Hot-Plug Drive Bays

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Should I choose the 12-bay 3.5" model or a different bay count for my storage needs?

This server is the 12-bay 3.5" configuration, providing twelve drive slots for the installed 4TB SATA hard drives.

What does the 2.4GHz base clock with 3.3GHz turbo mean for actual workload performance?

The two Xeon E5-2680 v4 processors run at 2.4GHz base and can boost to 3.3GHz, delivering 28 total cores for multi-threaded applications.

How does the PERC H730 12Gb/s SAS/SATA controller limit drive throughput in practice?

The H730 controller supports 12Gb/s SAS and 6Gb/s SATA, so the installed 6Gb/s SATA drives operate at their native interface speed.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.