Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

DELL

DELL PowerEdge R740 2U 8 Bay 2x Xeon 8160 2.1GHz 24C 768GB DDR4 H730P

SKU CH-0KH6-PWK72

2U rack server with dual 24-core Xeon 8160 CPUs, 768GB DDR4, H730P RAID controller, 2x 300GB SAS drives, quad-port 1GbE/10GbE networking, iDRAC9 Enterprise, and redundant 750W PSUs

  • TypeRack
  • Rack Height2U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed2.10 GHz
  • CPU SocketLGA 3647
  • Two Xeon Platinum 8160 processors provide 24 cores each at 2.1 GHz for demanding workloads
  • 768 GB DDR4 2666 MHz ECC memory across 24 slots supports large datasets
  • PERC H730P 2 GB controller enables RAID 0, 1, 5, 6, 10, 50, 60 with battery backup
  • Quad-port X520/I350 card adds 2× 1 GbE and 2× 10 Gb SFP+ connectivity
  • Dual 750 W platinum power supplies with hot-swap redundancy keep the system running

Dual Xeon 24-core 2U server

The Dell PowerEdge R740 is a 2U rackmount server system equipped with two Intel Xeon Platinum 8160 processors. Each CPU delivers 24 cores at 2.1 GHz with a 3.7 GHz turbo frequency. The platform includes 768 GB of DDR4 2666 MHz registered ECC memory across 24 DIMM slots. A PERC H730P 2 GB controller manages SAS and SATA drives with RAID 0, 1, 5, 6, 10, 50, 60 and pass-through modes.

Suited for multi-threaded workloads

This configuration serves environments that need high core counts and large memory capacity in a 2U form factor. Dual 750 W platinum power supplies and iDRAC 9 Enterprise provide redundant power and remote management. Buyers requiring GPU accelerator support, greater drive bay density or single-thread optimisation should evaluate alternative platforms.

PERC H730P RAID controller with battery-backed cache

The installed Dell PERC H730P 2 GB 12 Gb/s SAS/SATA controller includes a battery-backed cache module. It supports RAID 0, 1, 5, 6, 10, 50, 60 and pass-through for the eight 2.5-inch drive bays. Two 300 GB 10K SAS drives are fitted. This controller choice determines the RAID levels and drive protocols available for the primary storage array.

Kohokohdat

  • Two Xeon Platinum 8160 processors provide 24 cores each at 2.1 GHz for demanding workloads
  • 768 GB DDR4 2666 MHz ECC memory across 24 slots supports large datasets
  • PERC H730P 2 GB controller enables RAID 0, 1, 5, 6, 10, 50, 60 with battery backup
  • Quad-port X520/I350 card adds 2× 1 GbE and 2× 10 Gb SFP+ connectivity
  • Dual 750 W platinum power supplies with hot-swap redundancy keep the system running

Tekniset tiedot

BrandDELL
SeriesPowerEdge R740
ModelR740
TypeRack
Rack Height2U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed2.10 GHz
CPU SocketLGA 3647
Number of CPU Cores24-Core Processor
# of Processors Installed2
MAX Processors2
ChipsetIntel C620
Installed Memory Size768GB
Memory TypeDDR4
Max Memory Capacity3TB
Number of Memory Slots24
Storage ControllerDell Perc H730P 2GB Controller
HDD InterfaceSAS
SSD (Installed)No
Raid LevelRAID 0/1/5/6/10/50/60
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
LAN Ports4 x Ports
Expansion SlotsRiser options with up to 8 PCIe Gen 3 slots, maximum of 4 x 16 slots
Management PortRJ 45
Operating SystemNo
Features8 x 2.5" SATA/SAS Hot-Plug Drive Bays

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What DDR4 memory speed and capacity are already installed in the R740?

The server ships with 768 GB of DDR4-2666 registered ECC memory across 24 slots, leaving room to expand up to 3 TB.

Can the existing PERC H730P controller manage the two 300 GB 10 K SAS drives in RAID while I add larger SAS or SATA drives later?

Yes, the H730P supports RAID 0, 1, 5, 6, 10, 50 and 60 plus pass-through, so you can keep the current drives and add more SAS or SATA devices.

How do I confirm the iDRAC 9 Enterprise remote management is active after the server powers on?

Connect the dedicated iDRAC network port, browse to its IP address and log in; the Enterprise licence will be shown on the dashboard.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.