Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 2U rack server with rail kit and front drive bays

DELL

DELL PowerEdge R740 2U rack server, dual Xeon 6130 2.10 GHz, 256GB DDR4, 48TB SAS, PERC H730, iDRAC9, rail kit

SKU CH-CABK-6WXNZ

A 2U rack server with dual 16-core Xeon 6130 processors at 2.10 GHz, 256GB DDR4 memory, 48TB nearline SAS storage, PERC H730 RAID controller, iDRAC9 remote management, and rail kit

  • Dual Xeon Gold 6130 processors with 16 cores each and 3.70 GHz turbo for heavy workloads
  • 256 GB DDR4 memory across eight 32 GB modules at 3200 MHz for large datasets
  • 48 TB enterprise SAS storage using four 12 TB 7.2K RPM drives for high capacity
  • PERC H730 RAID controller with 2 GB NV cache for data protection and performance
  • iDRAC9 Express remote management plus redundant power supplies for continuous uptime

Dell PowerEdge R740 2U rack server

This Dell PowerEdge R740 is a 2U rack server supplied new with a rail kit. It arrives with dual Xeon Gold 6130 16-core processors running at 2.10 GHz with turbo up to 3.70 GHz. The system includes 256 GB of DDR4 3200 MHz memory across eight 32 GB modules and 48 TB of storage via four 12 TB enterprise nearline SAS drives. Memory and drives are packaged separately and require installation before use.

Suits virtualization, private cloud

The dual 16-core CPUs and large memory capacity fit virtualization clusters, software-defined storage and high-performance computing tasks. Redundant hot-swap power supplies and iDRAC9 remote management support continuous operation. Buyers needing all-flash performance or workloads that exceed the installed 256 GB memory ceiling should consider other configurations. The server ships with components uninstalled, so teams without rack integration resources should plan accordingly.

PERC H730 RAID controller with 2 GB NV cache

Storage is managed by a PERC H730 12 Gb/s RAID controller equipped with 2 GB of non-volatile cache. This controller determines the RAID levels and drive protection available for the four 3.5-inch 7.2K RPM SAS drives. Network connectivity is provided by a Broadcom BCM5720 quad-port 1 GbE BASE-T rNDC adapter. Verify that the H730 RAID feature set matches your redundancy and throughput requirements before purchase.

Kohokohdat

  • Dual Xeon Gold 6130 processors with 16 cores each and 3.70 GHz turbo for heavy workloads
  • 256 GB DDR4 memory across eight 32 GB modules at 3200 MHz for large datasets
  • 48 TB enterprise SAS storage using four 12 TB 7.2K RPM drives for high capacity
  • PERC H730 RAID controller with 2 GB NV cache for data protection and performance
  • iDRAC9 Express remote management plus redundant power supplies for continuous uptime

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

What SAS speed does the PERC H730 controller support and how does that cap drive throughput?

The PERC H730 is a 12Gb/s RAID controller, so each attached 12Gb/s SAS drive is limited to that link rate.

What physical mounting hardware is included for rack installation?

A rail kit is supplied with the 2U chassis for sliding the server into a standard rack.

Which components must the buyer install before first boot?

The eight 32GB DDR4 memory modules and four 12TB 3.5-inch SAS drives ship separately and must be fitted into the DIMM slots and drive bays.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.