Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver rack-mount server chassis eight 3.5-inch drive bays front panel

DELL

DELL PowerEdge R740 8LFF 2x Xeon Bronze 3106 1.5TB RAM rack server

SKU CH-G9BP-WTPJ5

Eight 3.5-inch drive bays, dual 1.7 GHz Xeon Bronze 3106 CPUs and 1.5 TB DDR4 memory with PERC H730P RAID controller

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed1.7GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size1.5TB
  • Dual Xeon Bronze 3106 processors provide 1.7GHz clock speed
  • 5TB DDR4 ECC registered memory supports large datasets
  • PERC H730P RAID controller manages up to 8 SATA drives
  • iDRAC9 Enterprise licence enables remote server management
  • 10GbE 562T dual-port adapter delivers high-throughput networking

Dell PowerEdge R740 8-bay server

The Dell PowerEdge R740 is a 2U rack server populated with two Intel Xeon Bronze 3106 processors running at 1.7GHz. It ships with 1.5TB of DDR4 ECC registered memory and a PERC H730P RAID controller. The chassis provides eight 3.5-inch drive bays for SATA hard drives. Remote management is handled by iDRAC9 with an Enterprise licence.

Suited for memory-heavy workloads

This configuration suits buyers who need large memory capacity for virtualisation, databases or in-memory analytics. The dual-socket design and 1.5TB of installed RAM support dense virtual-machine deployments. Buyers who require more than two processor sockets or a GPU-ready chassis should look elsewhere.

Eight 3.5-inch SATA drive bays

The single specification that decides fit is the eight-bay 3.5-inch SATA backplane paired with the PERC H730P controller. It determines how many spinning drives you can install and which RAID levels are available. Confirm your storage density and RAID requirements match this layout before ordering.

Kohokohdat

  • Dual Xeon Bronze 3106 processors provide 1.7GHz clock speed
  • 5TB DDR4 ECC registered memory supports large datasets
  • PERC H730P RAID controller manages up to 8 SATA drives
  • iDRAC9 Enterprise licence enables remote server management
  • 10GbE 562T dual-port adapter delivers high-throughput networking

Tekniset tiedot

BrandDELL
SeriesPowerEdge
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed1.7GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size1.5TB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)40,00
Storage ControllerDell PERC H730P Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementiDRAC9 - Enterprise License
Dimensions36 x 24 x 10 in
Weight40

Kysymyksiä tästä tuotteesta

How do I install the server into a standard rack, and which step is most often missed?

Mount the 36 x 24 x 10 in chassis using the optional rail kit, then seat both 750 W power supplies and connect the PERC H730P cables; the step most often missed is engaging the rail safety latches before sliding the unit fully home.

What maintenance or replacement will the memory subsystem need later?

The 1536 GB DDR4 ECC registered memory fills 24 slots; plan to replace any failed DIMM with an identical DDR4 registered module and run the built-in memory test after each swap.

What limit appears first when the PERC H730P runs sustained write workloads?

The controller cache and the 750 W power budget saturate before the 10 GbE 562T adapter, so sustained throughput caps at the RAID controller write-commit rate.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.