Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 2U rack server with twelve 3.5-inch drive bays, front bezel and rails

DELL

DELL PowerEdge R740xd 2U 12-Bay 3.5" Rack Server 2x Xeon Gold 5118 2.3GHz 12-Core 256GB DDR4 H730P

SKU CH-7XDJ-P62VH

A 2U rack server with twelve 3.5-inch drive bays, dual Xeon Gold 5118 processors at 2.3 GHz, 256 GB DDR4 memory, and a PERC H730P storage controller

  • TypeRack
  • Rack Height2U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed2.30 GHz
  • CPU SocketLGA 3647
  • Dual Xeon Gold 5118 CPUs deliver 24 cores at 2.3 GHz base with 3.2 GHz turbo
  • 256 GB DDR4 2400 MHz registered ECC memory across 8 slots for reliable multitasking
  • PERC H730P 2 GB controller supports RAID 0, 1, 5, 6, 10, 50, 60
  • 12 front 3.5-inch SAS/SATA trays ready for high-capacity storage arrays
  • iDRAC9 Enterprise plus quad-port 1 GbE and 10 Gb SFP+ networking for remote management

2U 12-Bay Storage Server

The Dell PowerEdge R740xd is a 2U rack server built for storage-heavy workloads. Two Intel Xeon Gold 5118 processors provide 24 cores total at 2.30 GHz base frequency with 3.2 GHz turbo. It ships with 256 GB of DDR4 ECC memory across eight 32 GB modules and a PERC H730P RAID controller with 2 GB cache.

Suits Software-Defined Storage Builders

This chassis targets organisations deploying software-defined storage, virtual desktop infrastructure or service-provider platforms where drive density matters. The twelve 3.5-inch hot-swap trays accept SATA or SAS media but no drives are included. Buyers needing more than twelve drive bays or a different form factor should look elsewhere.

PERC H730P Controller Decides RAID Options

The installed Dell PERC H730P 2 GB controller supports RAID 0, 1, 5, 6, 10, 50, 60 and pass-through modes at 12 Gb/s SAS/SATA speeds. Its 2 GB cache and battery backup protect in-flight data during power loss. If your application requires a different RAID feature set or controller interface, this server will not match.

Kohokohdat

  • Dual Xeon Gold 5118 CPUs deliver 24 cores at 2.3 GHz base with 3.2 GHz turbo
  • 256 GB DDR4 2400 MHz registered ECC memory across 8 slots for reliable multitasking
  • PERC H730P 2 GB controller supports RAID 0, 1, 5, 6, 10, 50, 60
  • 12 front 3.5-inch SAS/SATA trays ready for high-capacity storage arrays
  • iDRAC9 Enterprise plus quad-port 1 GbE and 10 Gb SFP+ networking for remote management

Tekniset tiedot

BrandDELL
SeriesPowerEdge R740xd
ModelPowerEdge R740xd
TypeRack
Rack Height2U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed2.30 GHz
CPU SocketLGA 3647
Number of CPU Cores12-Core Processor
# of Processors Installed2
MAX Processors2
ChipsetIntel C620
Installed Memory Size256GB
Memory TypeDDR4
Max Memory Capacity3TB
Number of Memory Slots24
Storage ControllerDell Perc H730P 2GB Controller
HDD InterfaceSATA/SAS
SSD (Installed)No
Raid LevelRAID 0/1/5/6/10/50/60
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
LAN Ports4 x Ports
Expansion SlotsRiser options with up to 8 PCIe Gen 3 slots, maximum of 4 x 16 slots
Management PortRJ 45
Operating SystemNo
Features12 x 3.5" SATA/SAS Hot-Plug Drive Bays

Kysymyksiä tästä tuotteesta

How much power do the dual 750 W supplies draw when the R740xd runs 24/7?

The server includes two redundant 750 W platinum-efficiency power supplies that share the load and keep the system running if one unit fails.

Which drives and cables must I supply to populate the 12 front bays?

The chassis ships with twelve 3.5-inch SAS/SATA trays but no drives; you provide 3.5-inch SAS or SATA drives and the controller handles the rest.

Will the PERC H730P controller recognise older SAS drives I already own?

The H730P supports SAS and SATA interfaces with RAID 0, 1, 5, 6, 10, 50 and 60, so existing SAS drives that meet those standards will work.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.