Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Dell PowerEdge R940 3U rack server front view with bezel and drive trays

DELL

DELL PowerEdge R940 3U Rack Server 4x Xeon Gold 5120 2.2GHz 14-Core 768GB DDR4 H730P

SKU CH-SZYM-67QEM

3U rack server with four 14-core Xeon Gold 5120 processors, 768GB DDR4 ECC memory and PERC H730P RAID controller

  • TypeRack
  • Rack Height3U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed2.20 GHz
  • CPU SocketLGA 3647

Installed Memory Size 768GB

HDD None

CPU Model Gold 5120

  • Four-socket Xeon Gold 5120 compute density
  • 768 GB DDR4 ECC memory installed
  • PERC H730P controller supports RAID 0/1/5/6/10/50/60
  • Dual 10 Gb SFP+ and dual 1 GbE network ports
  • Redundant 1600 W platinum hot-swap power supplies

PowerEdge R940 3U 4-Socket Server

The Dell PowerEdge R940 is a 3U rack-mount server that delivers four-socket performance in a compact chassis. It ships with four Intel Xeon Gold 5120 processors, each running at 2.2 GHz with 14 cores. The system includes 768 GB of DDR4 2400 MHz registered ECC memory across 24 modules. A PERC H730P controller with 2 GB cache manages the eight 2.5-inch SAS/SATA drive bays.

Suited for dense compute workloads

This configuration suits organisations that run memory-intensive databases, virtualisation hosts or analytics platforms requiring high core counts and large RAM capacity in minimal rack space. The quad-processor design and 48 DIMM slots support expansion up to 6 TB of DDR4. Buyers who need fewer than four CPUs or a tower form factor should consider alternative platforms.

PERC H730P RAID controller

The installed Dell PERC H730P 2 GB controller provides 12 Gb/s SAS/SATA connectivity with battery-backed cache. It supports RAID levels 0, 1, 5, 6, 10, 50 and 60 plus pass-through mode for software-defined storage. This single component determines whether the storage architecture matches your redundancy and performance requirements.

Kohokohdat

  • Four-socket Xeon Gold 5120 compute density
  • 768 GB DDR4 ECC memory installed
  • PERC H730P controller supports RAID 0/1/5/6/10/50/60
  • Dual 10 Gb SFP+ and dual 1 GbE network ports
  • Redundant 1600 W platinum hot-swap power supplies

Tekniset tiedot

BrandDELL
SeriesPowerEdge R940
ModelR940
TypeRack
Rack Height3U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed2.20 GHz
CPU SocketLGA 3647
Number of CPU Cores14-Core Processor
# of Processors Installed4
MAX Processors4
ChipsetIntel C620
Installed Memory Size768GB
Memory TypeDDR4
Max Memory Capacity6TB
Number of Memory Slots48
Storage ControllerDell Perc H730P 2GB Controller
HDD InterfaceSATA/SAS
SSD (Installed)No
Raid LevelRAID 0/1/5/6/10/50/60
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
LAN Ports4 x Ports
Expansion SlotsUp to 13 PCIe Gen 3 Slots, 3x PCIe x8, and 10 x PCIe 3.0 x16 slots
Management PortRJ 45
Operating SystemNo
Features8 x 2.5" SATA/SAS Hot-Plug Drive Bays

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What hard drives must I supply to use the eight 2.5-inch SAS/SATA trays?

You need to provide your own 2.5-inch SAS or SATA drives; the eight trays ship empty and the PERC H730P controller supports both interfaces.

Will my existing DDR4 2400 MHz registered ECC modules work alongside the 24 installed 32 GB sticks?

Yes, the server has 48 DDR4 slots total and 24 are already populated with 32 GB modules, leaving 24 free slots for compatible registered ECC memory.

How can I verify the PERC H730P controller is operating correctly after installation?

During POST the controller initialises and displays its firmware version; you can also check RAID status and battery health through iDRAC9 Enterprise or the controller BIOS utility.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.