Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Dell PowerEdge SC1435 server motherboard, green PCB with dual CPU sockets, eight DDR2 slots, integrated ATI graphics

DELL

DELL PowerEdge SC1435 Motherboard J637H

SKU CH-4C8C-K9GA1

Genuine Dell OEM server motherboard for PowerEdge SC1435 with dual AMD Opteron sockets, eight DDR2 ECC slots, integrated ATI ES1000 graphics, PCI-E x8, PCIX, dual SATA, dual RJ-45, dual USB.

  • Genuine Dell OEM part for PowerEdge SC1435 servers
  • Dual AMD Opteron socket design for multi-processor performance
  • Eight DDR2 ECC memory slots for high-capacity configurations
  • Integrated ATI ES1000 video with Broadcom HT-1000/HT-2100 chipset
  • PCI-E x8, PCIX, dual SATA, dual RJ-45 and dual USB connectivity

Genuine Dell PowerEdge SC1435 Server Motherboard

This genuine Dell OEM system board carries part number J637H and fits the PowerEdge SC1435 server. It provides a dual-socket platform for AMD Opteron processors and includes an integrated ATI ES1000 graphics controller. The board targets IT teams maintaining or repairing existing SC1435 infrastructure.

Verify dual Opteron socket

Confirm your chassis accommodates the dual AMD Opteron socket layout before ordering. You must supply two compatible Opteron CPUs and populate the eight DDR2 ECC memory slots with registered modules. Check that the single PCI-E x8, one PCIX, and two SATA internal ports match your expansion and storage plans. Ensure the external VGA, serial, dual RJ-45 and dual USB connectors satisfy your console and network needs.

Broadcom HT-1000 and HT-2100 chipset under

The Broadcom HT-1000 and HT-2100 chipset manages I/O across the PCI-E x8, PCIX and SATA interfaces during continuous operation. Integrated ATI ES1000 graphics handles basic display output without adding thermal load. With no active cooling on the board itself, system airflow must dissipate heat from both CPU sockets and the chipset during extended workloads.

Kohokohdat

  • Genuine Dell OEM part for PowerEdge SC1435 servers
  • Dual AMD Opteron socket design for multi-processor performance
  • Eight DDR2 ECC memory slots for high-capacity configurations
  • Integrated ATI ES1000 video with Broadcom HT-1000/HT-2100 chipset
  • PCI-E x8, PCIX, dual SATA, dual RJ-45 and dual USB connectivity

Tekniset tiedot

BrandDELL

Kysymyksiä tästä tuotteesta

Will this motherboard fit my PowerEdge SC1435 chassis?

This is a genuine Dell OEM system board with part number J637H. It is built specifically for the PowerEdge SC1435 server and matches the original mounting points and I/O shield.

What memory modules do I need to populate the eight slots?

The board provides eight DDR2 ECC slots. You must use registered ECC DDR2 DIMMs; the exact speed and capacity per slot are determined by the processor and BIOS revision installed.

Which expansion cards can I install in the available slots?

There is one PCI-E x8 slot and one PCIX slot. Both support full-height, full-length cards within the power and thermal limits of the SC1435 chassis.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.