Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Dell PowerEdge T430 5U tower server front view with sixteen 2.5 inch drive bays

DELL

DELL PowerEdge T430 16 Bay 2.5" 5U Server 2x Xeon E5-2695 v4 2.1GHz 18 Core 64GB DDR4 H730P 4x 960GB SSD

SKU CH-SAR8-1H4JG

A 5U tower server with sixteen 2.5-inch drive bays, dual 18-core Xeon processors at 2.1 GHz, 64 GB DDR4, a PERC H730P RAID controller and four 960 GB SSDs

  • Dual Xeon E5-2695 v4 CPUs provide 18 cores each for parallel workloads
  • 64 GB DDR4-2400 ECC memory protects data integrity under load
  • PERC H730P controller supports RAID 0, 1, 5, 6, 10, 50, 60 for flexible storage
  • Four 960 GB SATA SSDs supply fast solid-state capacity
  • Dual 750 W platinum power supplies maintain efficient uptime

DELL PowerEdge T430 5U Server

This DELL PowerEdge T430 is a 5U tower server system built for compute-intensive workloads. It ships with two Intel Xeon E5-2695 v4 processors running at 2.1GHz with 3.3GHz turbo across 18 cores each. The system includes 64GB of DDR4-2400 ECC registered memory and a PERC H730P storage controller with 2GB cache. Four 960GB SATA SSDs provide a ready storage foundation.

Suits virtualisation hosts needing many cores

The dual 18-core Xeon configuration and registered DDR4 suit virtualisation hosts, database nodes or rendering farms that rely on high thread counts and memory integrity. The H730P controller supports RAID 0, 1, 5, 6, 10, 50 and 60 for flexible array layouts. Buyers who need more than sixteen 2.5-inch drive bays or a different controller feature set should evaluate other platforms. The integrated dual-port Gigabit adapter and iDRAC 8 Express handle basic connectivity and remote management.

H730P RAID controller defines storage capability

The PERC H730P controller is the specification that determines whether this server matches your storage architecture. It delivers 12Gb/s SAS and SATA connectivity with hardware RAID across seven levels and pass-through mode. The included battery protects cached writes during power loss. If your deployment requires a different RAID feature set or HBA mode, this server will not meet that requirement.

Kohokohdat

  • Dual Xeon E5-2695 v4 CPUs provide 18 cores each for parallel workloads
  • 64 GB DDR4-2400 ECC memory protects data integrity under load
  • PERC H730P controller supports RAID 0, 1, 5, 6, 10, 50, 60 for flexible storage
  • Four 960 GB SATA SSDs supply fast solid-state capacity
  • Dual 750 W platinum power supplies maintain efficient uptime

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

Does the server ship with the front bezel and sliding rails, or do I need to order them separately?

The front bezel and Ready Rails are not included, so they must be purchased separately if required for your rack setup.

Is the 64 GB of memory the maximum the system can hold, or can I add more modules later?

The system arrives with 64 GB (4x 16 GB) DDR4-2400 ECC registered DIMMs installed; additional capacity depends on the number of free DIMM slots on the motherboard.

What RAID levels can the PERC H730P controller handle with the four 960 GB SSDs installed?

The H730P supports RAID 0, 1, 5, 6, 10, 50 and 60, so the four 960 GB drives can be configured in any of those arrays.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.