Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Tower server chassis, matte black finish, front bezel, eight 3.5-inch drive bays, redundant power supplies visible at rear

DELL

DELL PowerEdge T430 5U rack server 2× Xeon E5-2620 v4 2.1GHz 8-core 32GB DDR4 H730 8× 3.5″ trays 2× 750W PSU

SKU CH-JF37-9V2FP

5U rack server with dual Xeon E5-2620 v4 8-core CPUs, 32GB DDR4, PERC H730 RAID controller, eight 3.5″ drive trays and redundant 750W power supplies

  • Type0
  • Rack Height5U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed2.10 GHz
  • CPU SocketLGA 2011-3

Installed Memory Size 32GB

HDD None

  • Two Xeon E5-2620 v4 processors provide 8 cores each at 2.1 GHz base with 3.0 GHz turbo
  • 32 GB DDR4 2133 MHz registered ECC memory installed across 12 slots, expandable to 384 GB
  • PERC H730 controller with 1 GB cache supports RAID 0, 1, 5, 6, 10, 50, 60 for SATA and SAS drives
  • Eight 3.5″ hot-swap drive trays and dual 750 W platinum power supplies for internal capacity and redundancy
  • iDRAC 8 Express remote management plus dual-port 1 GbE LOM for out-of-band and network access

Dual Xeon E5-2620 v4 tower server

The Dell PowerEdge T430 is a 5U rack server equipped with two Intel Xeon E5-2620 v4 processors running at 2.1 GHz with eight cores each. It ships with 32 GB of DDR4 registered ECC memory and a PERC H730 storage controller with 1 GB cache. Eight 3.5-inch drive trays support SATA and SAS drives, while dual 750 W platinum power supplies provide redundancy.

Suits small-office and branch workloads

This configuration fits file, print, mail and web serving roles where twin-socket compute and internal storage bays are required. iDRAC 8 Express enables remote management for lights-out sites. Builders who need more than twelve memory slots, more than eight 3.5-inch bays, or integrated 10 GbE networking should evaluate other platforms.

H730 controller with eight 3.5-inch bays

The PERC H730 RAID controller supports RAID 0, 1, 5, 6, 10, 50 and 60 plus pass-through mode, backed by a battery. With eight hot-swap trays and support for both SATA and SAS drives, the storage subsystem determines how much local capacity and redundancy the server can deliver.

Kohokohdat

  • Two Xeon E5-2620 v4 processors provide 8 cores each at 2.1 GHz base with 3.0 GHz turbo
  • 32 GB DDR4 2133 MHz registered ECC memory installed across 12 slots, expandable to 384 GB
  • PERC H730 controller with 1 GB cache supports RAID 0, 1, 5, 6, 10, 50, 60 for SATA and SAS drives
  • Eight 3.5″ hot-swap drive trays and dual 750 W platinum power supplies for internal capacity and redundancy
  • iDRAC 8 Express remote management plus dual-port 1 GbE LOM for out-of-band and network access

Tekniset tiedot

BrandDELL
SeriesPowerEdge T430
ModelT430
Type0
Rack Height5U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed2.10 GHz
CPU SocketLGA 2011-3
Number of CPU Cores8-Core Processor
# of Processors Installed0
MAX Processors2
ChipsetIntel C610
Installed Memory Size32GB
Memory TypeDDR4
Max Memory Capacity384GB
Number of Memory Slots12
Hard Drive (Installed)None
Storage ControllerDell Perc H730 1GB Controller
HDD InterfaceSATA/SAS
SSD (Installed)No
Raid LevelRAID 0/1/5/6/10/50/60
Media Drives0
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerIntegrated Dell Broadcom 5720 Dual Port 1GbE LOM
LAN Ports4 x Ports
Expansion Slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management PortRJ 45
Operating SystemNo
Features8 x 3.5" SATA/SAS Hot-Plug Drive Bays

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What hard drives or SSDs must I provide to use the eight 3.5″ trays and the PERC H730 controller?

You need 3.5″ SAS or SATA drives; the H730 supports RAID 0, 1, 5, 6, 10, 50 and 60 and pass-through mode with its 1 GB cache.

Can I keep my existing DDR4 2133 MHz registered ECC modules and add them to the twelve memory slots?

Yes, the board has twelve DDR4 slots and a 384 GB maximum, so additional 2133 MHz registered ECC DIMMs will work alongside the four 8 GB modules already installed.

How do I confirm the iDRAC8 Express remote management is reachable after first power-on?

Connect the management port, note the DHCP address shown on the front LCD, then browse to that IP; the login prompt confirms iDRAC8 Express is active.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.