Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black mid-tower workstation chassis with front I/O panel

DELL

Dell Precision 5820 Tower Workstation Xeon W-2123 3.6GHz 16GB DDR4 500GB NVMe Quadro P600

SKU CH-RQPD-1KXFW

Tower workstation with Xeon W-2123, 16GB DDR4 ECC, 500GB NVMe and Quadro P600 graphics for professional workloads

  • TypeBusiness Desktops & Workstations
  • Form FactorMid Tower
  • UsageBusiness
  • ColorBlack
  • MonitorMonitor not included
  • Operating SystemWindows 11 Pro
  • Intel Xeon W-2123 4-core CPU reaches 3.9 GHz turbo for fast compute
  • 16 GB DDR4 2666 MHz registered ECC memory protects data integrity
  • 500 GB NVMe SSD provides rapid boot and application load
  • Nvidia Quadro P600 2 GB GDDR5 drives four DisplayPort outputs
  • 950 W 80 Plus Gold supply delivers 90 % efficient power

Dell Precision 5820 Tower Workstation

This Dell Precision 5820 is a mid-tower workstation built for professional workloads. It runs on an Intel Xeon W-2123 processor with four cores at 3.6 GHz and a 3.9 GHz turbo frequency. The system includes 16 GB of DDR4 2666 registered ECC memory across eight slots. A 500 GB NVMe SSD and an Nvidia Quadro P600 graphics card with 2 GB GDDR5 complete the core specification.

Suited for CAD and compute tasks.

The single Quadro P600 drives up to four displays via DisplayPort, making it a fit for 2D CAD, light 3D modelling and multi-monitor office layouts. Buyers who need certified drivers for heavier simulation or rendering should look elsewhere. The 950 W 80 Plus Gold power supply and LGA 2066 platform leave headroom for memory and storage upgrades, but the chassis does not support a second full-length graphics card.

Four-core Xeon W-2123 at 3.6 GHz decides fit

The W-2123 delivers four cores at 3.6 GHz with a 3.9 GHz turbo, so the right part choice hinges on whether your software scales to four threads or needs more. ECC memory and the NVMe drive keep data integrity and boot times solid. If your workload demands higher core counts or faster single-thread speeds, this CPU will be the limiting factor.

Kohokohdat

  • Intel Xeon W-2123 4-core CPU reaches 3.9 GHz turbo for fast compute
  • 16 GB DDR4 2666 MHz registered ECC memory protects data integrity
  • 500 GB NVMe SSD provides rapid boot and application load
  • Nvidia Quadro P600 2 GB GDDR5 drives four DisplayPort outputs
  • 950 W 80 Plus Gold supply delivers 90 % efficient power

Tekniset tiedot

SeriesPrecision
ModelT5820
TypeBusiness Desktops & Workstations
Form FactorMid Tower
UsageBusiness
ColorBlack
MonitorMonitor not included
Operating SystemWindows 11 Pro
CPU TypeIntel Xeon
CPU NameW-2123 (3.60GHz)
CPU Socket TypeLGA 2066
GPU/VGA TypeNVIDIA Quadro P600
Memory Capacity16GB DDR4
Memory SpeedDDR4 2666
Memory Slot (Total)8
Maximum Memory Supported256 GB
SSD500 GB pcie
HDDNo
Screen SizeNo Screen

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How loud and hot does the 950 W 80 Plus Gold power supply run when the Xeon W-2123 and Quadro P600 are under sustained load?

The 950 W 80 Plus Gold unit is rated at 90 % efficiency, so it generates less waste heat than lower-rated supplies; fan speed ramps with load, keeping acoustics low during typical workstation tasks.

Which display cables or adapters do I need to connect monitors to the Quadro P600's four DisplayPort outputs?

The card provides four DisplayPort connectors; use DisplayPort-to-DisplayPort cables for native connection or DisplayPort-to-HDMI/DVI adapters for legacy screens.

Will my existing DDR4-2666 ECC modules work alongside the two factory-installed 8 GB sticks in the eight available slots?

Yes, the board has eight DDR4 slots supporting up to 256 GB of registered ECC memory at 2666 MHz, so compatible modules can be added to the populated pair.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.