DELL
DELL PX05SRB096Y 960GB 2.5" SAS enterprise SSD
A 960 GB 2.5 inch SAS enterprise SSD built with MLC flash for read-intensive workloads in compatible Dell PowerEdge servers
- 960 GB capacity stores large enterprise datasets
- SAS 12 Gb/s interface delivers high-throughput server performance
- MLC NAND provides read-intensive endurance for critical workloads
- 5 inch form factor fits Dell PowerEdge R210 through R930 servers
- New condition ensures full manufacturer specification compliance
960 GB SAS enterprise drive
This Dell 2.5-inch solid-state drive provides 960 GB of capacity for read-intensive server workloads. It connects through a SAS 12 Gb/s interface and uses MLC flash technology. The drive is built for Dell PowerEdge platforms from the R210 through the R930 families.
Thermals and power in operation
As a solid-state device with no moving parts the drive generates minimal heat and runs silently in a 2.5-inch bay. Power draw stays low compared with mechanical drives of the same capacity. The 1.0 pound weight adds little to chassis loading.
Fits 2.5-inch hot-plug bays
The 2.5-inch form factor slides directly into Dell hot-plug trays without adapters or brackets. SAS 12 Gb/s connectivity works with existing backplanes and PERC controllers in the listed servers. No extra cabling or firmware steps are required for integration.
Kohokohdat
- 960 GB capacity stores large enterprise datasets
- SAS 12 Gb/s interface delivers high-throughput server performance
- MLC NAND provides read-intensive endurance for critical workloads
- 5 inch form factor fits Dell PowerEdge R210 through R930 servers
- New condition ensures full manufacturer specification compliance
Tekniset tiedot
Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.
Kysymyksiä tästä tuotteesta
How do I install the PX05SRB096Y into a Dell R730 server, and what step is often missed?
Slide the 2.5 inch SAS drive into the hot-plug bay until the carrier clicks, then verify the controller sees the 12Gb/s link — skipping the link-speed check is the common oversight.
What maintenance or replacement will the 960GB MLC SSD need later?
Monitor SMART wear indicators; when the media-wear-out metric approaches the threshold, replace the drive — no other scheduled service is required.
What limit appears first on the PX05SRB096Y during sustained writes?
The SAS 12Gb/s interface bandwidth and MLC write-endurance ceiling are the first constraints under continuous heavy write workloads.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
