NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
DELL
Adds 8 GB of DDR4 2666 MHz ECC memory with a CL1.5 latency 288-pin DIMM for Dell server upgrades
This 8 GB DDR4 module is built for Dell servers that require error-correcting code memory. It operates at 2666 MHz with a CAS latency of 1.5 and uses the standard 288-pin DIMM form factor. The part is supplied new and carries Dell's own qualification.
Dell validates each module through a sustaining qualification process and accepts only first-pass yield components. The black PCB has no LED lighting, keeping the focus on reliability in dense server chassis. Using Dell-certified memory preserves the original system warranty and ensures full technical support coverage.
The PC4-21300 interface caps bandwidth at the rated 2666 MT/s, so workloads needing higher throughput will hit a ceiling with this module. An 8 GB stick also limits total density per channel compared to larger-capacity DIMMs. Systems requiring faster DDR4 speeds or greater per-slot capacity must look beyond this specification.
| Brand | Dell |
|---|---|
| Capacity | 8GB |
| Type | 288-Pin PC RAM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL1.5 |
| ECC | ECC |
| Color | Black |
| LED Color | None |
| Lähetyspaino | 0.45 kg |
| Pakkauksen mitat | 165 × 50 × 2 mm |
Yes, the PC4 21300 designation means the module is rated for a maximum data rate of 21300 MB/s when installed in a supported Dell system.
The 288-pin form factor matches standard DDR4 DIMM slots in compatible Dell PowerEdge servers; verify your specific model in the Dell Memory Selector.
Power down the server, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until the retention clips click, then enable ECC in the BIOS if it is not set by default.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?