Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

DELL

DELL ST2000NM0005 2TB 7200RPM SAS 12Gbps 3.5" internal hard drive with caddy

SKU CH-Z62C-BB5X5

A 2000 GB enterprise SAS hard drive spinning at 7200 RPM with a 12 Gbps interface, supplied in a 3.5 inch form factor with an included R-series caddy

  • 2 TB capacity stores large datasets and backups
  • 7200 RPM spindle delivers responsive data access
  • 12 Gbps SAS interface moves data quickly
  • 5 inch form factor fits standard drive bays
  • Includes R Series caddy for simple installation

Enterprise storage upgrade

The DELL ST2000NM0005 is a 2000GB 3.5" internal hard drive built for enterprise workloads. It spins at 7200RPM and connects through a SAS 12Gb/s interface. The package includes an R Series caddy for direct mounting in compatible drive bays.

Replaces slower or smaller SAS drives

This unit steps up from lower-capacity or lower-speed SAS disks when you need more space and sustained throughput for server or workstation arrays. The jump is worth it when your current drives limit volume size or cannot keep pace with 12Gb/s controller bandwidth.

Verify SAS backplane and caddy fit

Confirm that your system uses a 3.5" SAS 12Gb/s backplane and accepts the supplied R Series tray. Check that the controller supports 7200RPM enterprise drives and that power and cooling are adequate for continuous operation.

Kohokohdat

  • 2 TB capacity stores large datasets and backups
  • 7200 RPM spindle delivers responsive data access
  • 12 Gbps SAS interface moves data quickly
  • 5 inch form factor fits standard drive bays
  • Includes R Series caddy for simple installation

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

What clearance does the 3.5" SAS drive with included R Series caddy require in a drive bay?

The drive is a standard 3.5-inch form factor and ships with an R Series caddy, so it fits any bay that accepts a 3.5" SAS drive with that tray.

Which step is often missed when installing the ST2000NM0005 into a Dell server?

The 12 Gbps SAS interface needs a backplane or controller that supports 12 Gb/s; connecting it to a 6 Gb/s backplane will work but at the lower speed.

When should the 7200RPM enterprise drive be replaced in a RAID array?

Replace the drive if SMART attributes show reallocated sectors, seek errors, or if the array controller flags it as degraded during patrol reads.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.