DELL
DELL THGNN 4TB 7200 RPM SATA 3.5" internal hard drive
4 TB desktop hard drive with 7200 RPM SATA 6.0 Gb/s interface in a 3.5-inch form factor
- InterfaceSATA 6.0Gb/s
- Capacity4TB
- RPM7200 RPM
- Form Factor3.5"
- 4 TB capacity stores large media libraries and backups
- 7200 RPM spindle delivers responsive read and write speeds
- SATA 6.0 Gb/s interface ensures broad desktop compatibility
- 5-inch form factor fits standard drive bays and trays
- New condition provides a clean, unused drive for reliable deployment
Dell THGNN 4 TB 7200 RPM SATA drive
This 3.5-inch internal hard drive provides 4 TB of storage on a SATA 6.0 Gb/s interface. It is built for desktop systems that need high-capacity bulk storage at a 7200 RPM spindle speed.
Capacity and headroom
Four terabytes hold large media libraries, backups and archives with room to grow. Sequential throughput is limited by the SATA 6.0 Gb/s link, so sustained transfers top out around the interface ceiling rather than the platters.
Thermals noise and power
A 7200 RPM mechanical drive generates audible seek noise and measurable heat under continuous load. Typical desktop airflow keeps temperatures in a safe range without extra cooling. Power draw rises during spin-up and heavy write sessions but stays within standard SATA limits.
Kohokohdat
- 4 TB capacity stores large media libraries and backups
- 7200 RPM spindle delivers responsive read and write speeds
- SATA 6.0 Gb/s interface ensures broad desktop compatibility
- 5-inch form factor fits standard drive bays and trays
- New condition provides a clean, unused drive for reliable deployment
Tekniset tiedot
| Interface | SATA 6.0Gb/s |
|---|---|
| Capacity | 4TB |
| RPM | 7200 RPM |
| Form Factor | 3.5" |
Kysymyksiä tästä tuotteesta
Will this 3.5" 7200 RPM SATA 6.0Gb/s drive work in an older desktop that only supports SATA 3.0Gb/s?
Yes, the SATA 6.0Gb/s interface is backward compatible with SATA 3.0Gb/s ports, so the drive will operate at the slower speed.
How can I verify the 4TB capacity and 7200 RPM speed are recognised correctly after installation?
Check the drive properties in your operating system or BIOS; they should report 4TB capacity and the SATA 6.0Gb/s link speed.
Does the retail kit include mounting screws and a SATA data cable, or must I buy them separately?
The kit contains the 3.5" hard drive only; mounting screws and a SATA data cable are not included and must be purchased separately.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
