DELL
DELL W9MNK 2.4TB 2.5" SAS 10K 12Gb/s internal hard drive
A 2.4 TB SAS hard drive spinning at 10000 RPM with a 12 Gb/s transfer rate and hot-swap capability
- PackagingBare Drive
- InterfaceSAS 6Gb/s
- Capacity2.4TB
- RPM10000 RPM
- Average Latency6Gb/s
- Form Factor2.5"
- 4 TB capacity stores large datasets
- 10 000 RPM spindle delivers fast data access
- SAS interface supports 12 Gb/s transfer rate
- 5 inch form factor fits dense server bays
- Hot-swap tray enables drive changes without downtime
Dell W9MNK 2.4TB SAS drive
The Dell W9MNK is a 2.5-inch internal hard drive with a 2.4TB capacity and a 10000 RPM spindle speed. It connects through a SAS interface rated at 12Gb/s transfer rate. This drive suits servers and storage arrays that require high-throughput mechanical storage.
Hot-swap tray included
The unit ships as a bare drive equipped with a hot-swap tray. This tray allows insertion and removal while the host system remains powered on. No additional mounting hardware or software utilities are bundled with the drive.
Verify SAS controller and bay compatibility
Confirm that your system provides a SAS backplane or controller supporting 12Gb/s operation. Ensure a 2.5-inch hot-swap bay is available and that the chassis supplies adequate cooling for 10000 RPM operation. Buyers needing a different interface or a non-hot-swap form factor should consider other models.
Kohokohdat
- 4 TB capacity stores large datasets
- 10 000 RPM spindle delivers fast data access
- SAS interface supports 12 Gb/s transfer rate
- 5 inch form factor fits dense server bays
- Hot-swap tray enables drive changes without downtime
Tekniset tiedot
| Brand | Dell |
|---|---|
| Model | W9MNK |
| Packaging | Bare Drive |
| Interface | SAS 6Gb/s |
| Capacity | 2.4TB |
| RPM | 10000 RPM |
| Average Latency | 6Gb/s |
| Form Factor | 2.5" |
Kysymyksiä tästä tuotteesta
How often will the 10000 RPM SAS drive need replacement under continuous use?
Enterprise 10000 RPM drives are rated for constant operation; plan replacement on your refresh cycle or when SMART alerts appear.
Does the 12Gb/s SAS interface or the 10000 RPM spindle limit sustained throughput first?
The 10000 RPM spindle typically limits sustained throughput before the 12Gb/s SAS interface saturates.
What noise and heat should I expect from the 2.5" 10000 RPM drive running all day?
The 2.5" 10000 RPM drive produces noticeable seek noise and measurable heat; ensure adequate airflow in the bay.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
