Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

DOCTOR METAL

DOCTOR METAL UF-SL120-3B case fan 3-pack white ARGB 120mm

SKU CH-9F6B-QE8VP MPN UF-SL120-3B

Three white 120 mm ARGB fans with fluid-dynamic bearings, 800-1900 RPM, 55-60 CFM and 17-31 dB snap together wirelessly and run from a single controller

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeFluid Circulative Bearing(FDB)
  • RPM800~1900 RPM
  • Air Flow55-60 CFM
  • Noise Level17-31 DB
  • Modular snap-together design cuts cable clutter
  • 32 ARGB LEDs per fan enable vivid lighting effects
  • 800–1900 RPM range balances airflow and quiet operation
  • Fluid circulative bearing reduces friction for longer life
  • Controller supports up to 16 fans per system

Three-pack modular ARGB fans

This 3-pack of 120 mm white ARGB case fans uses a snap-together design that removes most wiring between units. A Fluid Circulative Bearing supports 800–1900 RPM operation with a rated voltage of 12 V for the motor and 5 V for the LEDs. The included controller can address up to 16 fans across its ports.

Airflow and static pressure limits

Maximum air volume reaches 58.54 CFM while peak static pressure is 2.54 mm H₂O, with a typical range quoted at 55–60 CFM. At the top speed the fans move enough air for mainstream CPU coolers or case intake, but dense radiator fins or very restrictive filters will reduce effective flow.

Acoustics and power in daily use

Noise spans 17–31 dB across the speed curve, so the fans stay quiet at low RPM and remain moderate even at full speed. Each fan draws at least 0.5 mA on the 5 V LED rail and 12 V on the motor rail. The modular connectors add no audible vibration when snapped together.

Kohokohdat

  • Modular snap-together design cuts cable clutter
  • 32 ARGB LEDs per fan enable vivid lighting effects
  • 800–1900 RPM range balances airflow and quiet operation
  • Fluid circulative bearing reduces friction for longer life
  • Controller supports up to 16 fans per system

Tekniset tiedot

TypeCase Fan
CompatibilityCase
Bearing TypeFluid Circulative Bearing(FDB)
RPM800~1900 RPM
Air Flow55-60 CFM
Noise Level17-31 DB
ColorWhite
LEDARGB
Package Contents122.8X 122.4X2 5MMX 3PCS

Kysymyksiä tästä tuotteesta

Will the 120 mm ARGB fans share a single PWM header with my existing case fans?

Yes, the daisy-chain design lets you connect multiple fans in series and run them from one motherboard PWM header.

How can I confirm the 32 ARGB LEDs per fan are synchronised after installation?

Open L-Connect or your motherboard RGB software and verify the lighting effects match across all connected fans.

Does the 3-pack include the controller and cables, or must I buy them separately?

The pack contains three fans and one controller; no extra cables or controllers are required.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.