Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Six white 120mm ARGB fans with modular snap-together frames and controller

DOCTOR METAL

DOCTOR METAL UF-SL120-6B 6-pack 120mm ARGB case fan

SKU CH-SHJX-Y9FTG MPN UF-SL120-6B

Six white 120 mm ARGB fans with modular snap-together design, fluid-dynamic bearings, 800–1900 RPM, 55–60 CFM airflow and 17–31 dB noise

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeFluid Circulative Bearing(FDB)
  • RPM800~1900 RPM
  • Air Flow55-60 CFM
  • Noise Level17-31 DB
  • Modular snap-together design reduces cable clutter and screw count
  • Fluid circulative bearing runs at 17-31 dB for quiet operation
  • 32 ARGB LEDs per fan with controller or software sync
  • PWM speed range 800-1900 RPM delivers up to 58.54 CFM airflow
  • Controller supports up to 16 fans across four ports per channel

Modular 6-fan kit with ARGB

The UF-SL120-6B delivers six 120 mm fans that snap together without individual wiring. Builders who want clean cable routing and synchronised lighting across multiple intake or exhaust positions will appreciate the daisy-chain design. It suits cases with enough clearance for 25 mm thick frames.

Controller port limit of four fans per port

Each controller port supports up to four fans, so the six-pack requires both ports or an additional controller for full operation. The 5 V ARGB and 12 V PWM leads connect through the interlocking frames, reducing wire count but fixing the maximum chain length per port. Builders needing more than 16 fans total must add hardware.

Airflow up to 58.54 CFM at 1900 RPM

At maximum speed the fans move 58.54 CFM with 2.54 mm H₂O static pressure while staying between 17 and 31 dB. The 800–1900 RPM range handles typical case ventilation and radiator push-pull setups. Demanding high-restriction loops or silent-build targets may exceed the practical headroom of this spec.

Kohokohdat

  • Modular snap-together design reduces cable clutter and screw count
  • Fluid circulative bearing runs at 17-31 dB for quiet operation
  • 32 ARGB LEDs per fan with controller or software sync
  • PWM speed range 800-1900 RPM delivers up to 58.54 CFM airflow
  • Controller supports up to 16 fans across four ports per channel

Tekniset tiedot

TypeCase Fan
CompatibilityCase
Bearing TypeFluid Circulative Bearing(FDB)
RPM800~1900 RPM
Air Flow55-60 CFM
Noise Level17-31 DB
ColorWhite
LEDARGB
Package Contents122.8X 122.4X2 5MMX 3PCS

Kysymyksiä tästä tuotteesta

Should I buy the 6-pack or look for a smaller kit?

The 6-pack includes a controller that manages up to 16 fans across its ports, so you can start with six and add more later without extra hardware.

What does 58.54 CFM actually deliver inside a case?

At 1900 RPM the fans move 58.54 CFM with 2.54 mm H₂O static pressure, giving strong airflow through radiators or restrictive front panels.

How does the daisy-chain connector limit the build?

Each controller port supports four fans, and the controller handles 16 fans total, so the daisy-chain caps at four per string before you need another port.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.