Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Dynatron J10 copper heatsink with fan, silver fin stack, 4.7x3.6x2.6 inches

Dynatron

Dynatron J10 SP5 CPU cooler 300W 4.7x3.6x2.6

SKU CH-SX10-8W7DM MPN J10

Active air cooler for AMD Genoa Socket SP5 processors, dissipating up to 300W with heatpipes and aluminium fin stack in a 4.7 by 3.6 by 2.6 inch form factor

  • TypeFan & Heatsinks
  • Cools AMD Genoa CPUs up to 300W TDP
  • Pre-applied Shin-Etsu 7762 thermal grease saves installation time
  • Compact 4.7x3.6x2.6in design fits 2U servers
  • Active heatpipe and aluminum fin stack dissipates heat efficiently
  • Purpose-built for Socket SP5 platform compatibility

SP5 cooler for Genoa servers

The Dynatron J10 is an active air cooler built for AMD Genoa processors on Socket SP5. It is designed for 2U server chassis and higher, targeting administrators who need reliable thermal management for dense compute nodes. Buyers needing liquid cooling loops or support for other socket types will not be served by this model.

Shin-Etsu 7762 paste included

Pre-applied Shin-Etsu 7762 thermal grease removes the need for separate compound application during installation. This saves assembly time and ensures consistent coverage across the heatspreader for immediate operation.

Copper heatpipes with aluminium stack

Heatpipes combine a copper base with an aluminium fin stack to move heat away from the CPU. The unit measures 4.7 x 3.6 x 2.6 inches, fitting standard 2U rail spacing while supporting up to 300W TDP dissipation.

Kohokohdat

  • Cools AMD Genoa CPUs up to 300W TDP
  • Pre-applied Shin-Etsu 7762 thermal grease saves installation time
  • Compact 4.7x3.6x2.6in design fits 2U servers
  • Active heatpipe and aluminum fin stack dissipates heat efficiently
  • Purpose-built for Socket SP5 platform compatibility

Tekniset tiedot

TypeFan & Heatsinks
Lähetyspaino0.59 kg
Pakkauksen mitat140 × 124 × 99 mm

Kysymyksiä tästä tuotteesta

Will the Shin-Etsu 7762 thermal grease need to be reapplied later?

The Shin-Etsu 7762 compound is pre-applied and designed for long-term stability; replacement is only needed if the cooler is removed or after several years of continuous operation.

What thermal limit defines the maximum sustained load for this cooler?

The cooler is rated to dissipate up to 300W TDP; sustained loads above that level will exceed its heat-removal capacity.

How much heat and fan noise should I expect when it runs continuously in a 2U server?

At full 300W load the fan spins faster to move heat through the aluminum fin stack, producing noticeable airflow noise and warm exhaust air inside the chassis.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.