Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Dynatron J12 copper heatsink with aluminum fins and fan for Socket SP5

Dynatron

Dynatron J12 CPU cooler Socket SP5 320W TDP

SKU CH-WZGV-9WGWA MPN J12

Socket SP5 air cooler with copper heatpipes and pre-applied Shin-Etsu 7762 grease, rated for 320W TDP in 2U servers

  • TypeFan & Heatsinks
  • Supports AMD Genoa Socket SP5 processors
  • Handles up to 320W TDP thermal load
  • Copper heat spreader with aluminum base transfers heat efficiently
  • Pre-applied Shin-Etsu 7762 thermal grease simplifies installation
  • Compact 4.7 x 3.6 x 4.1 inch footprint fits 2U servers

AMD Genoa SP5 320W cooler

The Dynatron J12 is an active air cooler built for AMD Genoa processors on the SP5 socket. It uses heatpipes with an aluminium fin stack and a copper heat spreader on an aluminium base to handle up to 320W TDP. The unit fits 2U server chassis and taller enclosures. Shin-Etsu 7762 thermal grease comes pre-applied on the cold plate.

2U clearance with pre-applied paste

Installation follows the standard SP5 mounting pattern used in 2U and larger servers. The pre-applied Shin-Etsu 7762 compound removes the need for separate paste application and reduces the risk of uneven coverage. Builders must verify that the 4.7 by 3.6 by 4.1 inch envelope clears memory modules, VRM heatsinks and chassis side panels in their specific system.

Sustained 320W dissipation in server airflow

Under continuous load the copper spreader and heatpipe array move heat into the aluminium fin stack where forced airflow from system fans carries it away. The cooler is rated for 320W TDP in environments that maintain front-to-rear airflow typical of rack servers. Systems with restricted airflow or lower fan speeds will see higher steady-state temperatures. Buyers needing liquid cooling or support for sockets other than SP5 should look elsewhere.

Kohokohdat

  • Supports AMD Genoa Socket SP5 processors
  • Handles up to 320W TDP thermal load
  • Copper heat spreader with aluminum base transfers heat efficiently
  • Pre-applied Shin-Etsu 7762 thermal grease simplifies installation
  • Compact 4.7 x 3.6 x 4.1 inch footprint fits 2U servers

Tekniset tiedot

TypeFan & Heatsinks
Lähetyspaino0.91 kg
Pakkauksen mitat152 × 140 × 114 mm

Kysymyksiä tästä tuotteesta

How do I verify the Dynatron J12 is cooling my AMD Genoa processor correctly after installation?

Monitor CPU temperatures under load using system monitoring software; the cooler is rated for 320W TDP so temperatures should remain within the processor's specified limits during sustained workloads.

What components are included with the Dynatron J12 and is any additional thermal paste required?

The package includes the copper heatpipe heatsink with aluminum fin stack and pre-applied Shin-Etsu 7762 thermal grease on the base, so no separate thermal compound is needed for initial installation.

Which Dynatron J12 variant should I select for a 2U server build with an SP5 socket CPU?

The J12 model is designed for 2U and taller server chassis, supports Socket SP5 processors up to 320W TDP, and measures 4.7 x 3.6 x 4.1 inches to fit standard 2U clearance.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.