Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Compact 1U all-in-one liquid cooler with black radiator and tubing, Intel LGA7529 socket mount

Dynatron

Dynatron L37 All-in-One Liquid Cooler 1U Intel Granite Rapids LGA7529

SKU CH-43F4-0QF96

A 1U all-in-one liquid cooler for Intel Granite Rapids SP processors in LGA7529 sockets, handling up to 500W TDP with a 2.9 L/min pump and pre-applied Shin-Etsu 7762 thermal grease

  • TypeLiquid Cooling System
  • Cools Intel Granite Rapids SP processors via LGA7529 socket
  • Handles up to 500W TDP for high-density 1U servers
  • Pump delivers 2.9 litre-per-minute flow for efficient heat removal
  • Pre-applied Shin-Etsu 7762 thermal grease ensures immediate thermal contact
  • All mounting hardware included for straightforward installation

1U Server Liquid Cooler for Granite Rapids

The Dynatron L37 is an all-in-one liquid cooler built for 1U server chassis supporting Intel Granite Rapids SP processors in the LGA7529 socket. It ships with pre-applied Shin-Etsu 7762 thermal grease and all required mounting hardware for straightforward installation. This cooler targets system integrators and IT teams deploying high-density compute nodes where space is at a premium.

500W TDP Capacity with 2.9 L/min Pump Flow

The unit is rated to dissipate up to 500W TDP, providing headroom for the most demanding Granite Rapids SKUs under sustained load. Its integrated pump delivers a flow rate of 2.9 litres per minute to move heat quickly from the cold plate to the radiator. Thermal limits will be reached if the processor exceeds the rated TDP or if chassis airflow is insufficient to reject heat from the radiator.

Compact Thermals for Dense Rack Deployments

Designed for 1U height, the cooler fits within tight vertical clearances while maintaining liquid-loop heat transfer to a chassis-mounted radiator. Acoustic output depends on the server fans pulling air through the radiator rather than on a dedicated cooler fan. Power draw is limited to the pump motor, keeping additional load on the power supply minimal during normal operation.

Kohokohdat

  • Cools Intel Granite Rapids SP processors via LGA7529 socket
  • Handles up to 500W TDP for high-density 1U servers
  • Pump delivers 2.9 litre-per-minute flow for efficient heat removal
  • Pre-applied Shin-Etsu 7762 thermal grease ensures immediate thermal contact
  • All mounting hardware included for straightforward installation

Tekniset tiedot

TypeLiquid Cooling System

Kysymyksiä tästä tuotteesta

Will the L37 fit in the same 1U slot as the cooler I currently use for my LGA7529 processor?

The L37 is a 1U all-in-one liquid cooler designed for Intel Granite Rapids SP processors on socket LGA7529, so it occupies a single rack unit like other 1U coolers for that socket.

How can I verify the pump is running at the specified 2.9 liters per minute after installation?

Monitor the pump speed in the server BIOS or management console; a stable reading near the rated 2.9 L/min flow indicates the pump is operating as intended.

Does the package include the Shin-Etsu 7762 thermal grease and all mounting hardware for LGA7529, or must I buy them separately?

The cooler ships with Shin-Etsu 7762 thermal grease pre-applied and includes all mounting components required for LGA7529 installation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.