E-POWER
E-POWER 120mm RGB PWM Case Fan 3-Pack with 8-Port Hub & RF Remote
Three 120 mm ARGB PWM fans, an 8-port hub and RF remote with 13 dynamic and 7 static modes
- TypeCase Fan
- CompatibilityCase
- RPM1600-1999 RPM
- Power Connector4 Pin
- Color2-Tone
- LEDRGB
- Three 120mm ARGB PWM fans for vivid lighting and airflow
- 8-port 4-pin hub expands a single motherboard header to eight fans
- RF remote switches between 13 dynamic and 7 static lighting modes
- PWM control balances cooling performance with noise level
- 12V operation with 1600-1999 RPM speed range
Three-Fan RGB PWM Kit
This bundle supplies three 120 mm ARGB PWM fans, an eight-port 4-pin hub and an RF remote. It is aimed at builders who want synchronised lighting and centralised speed control without occupying multiple motherboard headers. The kit suits custom cases that need extra intake or exhaust positions. Buyers who require more than eight connected fans will need additional hubs.
Thermals and Acoustics
Each fan operates between 1600 and 1999 RPM at 12 V, letting the motherboard adjust speed through the shared PWM signal. The hub passes that single signal to all connected fans so the system can balance airflow against noise automatically. No standalone acoustic or static-pressure figures are supplied.
Lighting and Control Extras
The remote cycles through 13 dynamic modes and 7 static colour modes across the three included fans. Because the hub consolidates power and PWM, a single motherboard header drives up to eight fans in unison. No software suite or addressable-header connection is included for per-LED programming.
Kohokohdat
- Three 120mm ARGB PWM fans for vivid lighting and airflow
- 8-port 4-pin hub expands a single motherboard header to eight fans
- RF remote switches between 13 dynamic and 7 static lighting modes
- PWM control balances cooling performance with noise level
- 12V operation with 1600-1999 RPM speed range
Tekniset tiedot
| Brand | E-POWER |
|---|---|
| Series | RGB |
| Model | TOP-FAN-2RGB3 |
| Type | Case Fan |
| Compatibility | Case |
| RPM | 1600-1999 RPM |
| Power Connector | 4 Pin |
| Color | 2-Tone |
| LED | RGB |
| Features | This bundle is great for custom cases. Expand your motherboard PWM fan header to support up to eight fans. All eight fans can spin according to the PWM signals received from your motherboard. Your entire system will strike the best balance between cooling performance and noise level. The included three ARGB PWM fans deliver not only massive airflow, but also vivid lighting. Use the included remote to juggle between 13 dynamic modes and 7 static modes. |
Kysymyksiä tästä tuotteesta
How do I install the 8-port hub and three ARGB fans using the motherboard PWM header?
Connect the hub’s single 4-pin PWM lead to a motherboard fan header, plug each fan’s 4-pin connector into any of the hub’s eight ports, and attach the fans’ ARGB cables to the hub’s matching ARGB ports.
What maintenance will the three 120 mm ARGB PWM fans need later?
The fans run at 1600-1999 RPM on 12 V power; clean dust from the blades and frame periodically, and replace any fan if bearing noise increases or airflow drops.
What limit appears first during sustained use of the 8-port hub with eight fans?
The hub passes one motherboard PWM signal to all connected fans, so every fan follows the same speed curve and total current draw is limited by the single header’s rating.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001054BTC
Varastossa