Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 2.85mm TPU filament spool, 500g, matte finish

E3D Online

E3D Online spoolWorks FleXD TPU Filament 2.85mm 500g Green 3d printers accessory

SKU CH-GN7Y-X1P26

Semi-flexible TPU filament on a 500 g spool, 2.85 mm diameter, prints at 220–240 °C with high abrasion resistance and vibrant green colour

  • ColorGreen
  • TypeFilament
  • Easy printing with 30% standard speed at 15mm/s
  • High abrasion resistance for durable functional parts
  • High shear strength handles mechanical stress well
  • Elastic flexibility enables bendable prints like phone cases
  • 85mm diameter on 500g spool fits compatible printers

Filament for flexible prints

E3D spoolWorks FleXD is a semi-flexible TPU filament supplied as a 500 g spool of 2.85 mm green material. It prints at 220-240 °C with a bed temperature of 45-85 °C and a recommended speed of 15 mm/s. The formulation delivers high shear strength and abrasion resistance while remaining elastic with a rich, solid colour.

Upgrade from rigid plastics

This filament replaces standard PLA or ABS when parts need to bend, absorb impact or survive repeated flexing. The jump is worth it for functional items such as phone cases, keyboard protectors, insoles or any design that benefits from rubber-like behaviour. It is not for buyers who need a rigid structural material or a dissolvable support filament.

Check printer compatibility

Verify that your extruder and hot-end can handle flexible TPU at the stated temperatures and the slow 15 mm/s feed rate. A glue stick on the build plate is recommended for bed adhesion. Ensure the filament path is well constrained to prevent buckling during the print.

Kohokohdat

  • Easy printing with 30% standard speed at 15mm/s
  • High abrasion resistance for durable functional parts
  • High shear strength handles mechanical stress well
  • Elastic flexibility enables bendable prints like phone cases
  • 85mm diameter on 500g spool fits compatible printers

Tekniset tiedot

BrandE3D
ModelFleXD
ColorGreen
TypeFilament

Kysymyksiä tästä tuotteesta

What filament diameter and spool weight does this 2.85 mm green FleXD come on?

The spool holds 500 g of 2.85 mm filament, so confirm your extruder and Bowden path accept that diameter before loading.

Which slicer settings do users most often mis-set for this semi-flexible TPU?

Print at 15 mm/s (30 % of normal speed) with the nozzle at 220-240 °C and the bed at 45-85 °C; skipping the low speed causes jams and under-extrusion.

How should the spool be stored to keep the TPU printable over time?

Keep the filament sealed with desiccant when not printing; TPU absorbs moisture quickly and will bubble or lose layer adhesion if left exposed.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.