EN-Labs
EN-Labs 4LAYLED12025MX 120mm case fan 1100 RPM 28 dBA multi-color LED hydraulic bearing 3/4-pin
120 mm case fan with hydraulic bearing, 1100 RPM, 28 dBA and multi-colour LED lighting
- Fan Counts1 Fan
- TypeCase Fan
- CompatibilityCase
- Fan Thickness25mm
- Bearing TypeHydraulic
- RPM1100 RPM ± 10%
- Quiet cooling at 28 dBA for focused work
- Multi-layer LED lighting adds subtle colour to builds
- 1100 RPM delivers 50-55 CFM airflow through 11 blades
- Hydraulic bearing rated for 30000 hours of life
- 3-pin and 4-pin connectors fit most motherboards
What this fan fits
This EN-Labs 4LAYLED12025MX is a 120mm case fan with a 25mm thickness and eleven blades. It targets builders who want a single cooling unit that adds multi-color LED lighting while moving 50-55 CFM at 28 dBA. The hydraulic bearing is rated for 30,000 hours of operation.
Connector and speed limits
Power comes from either a motherboard 3-pin header or a Molex 4-pin 12 VDC plug, so fan speed is controlled by voltage rather than PWM duty cycles. The motor runs at 1100 RPM with a ten-percent tolerance, which fixes the airflow and noise output within a narrow band. Systems that rely on 4-pin PWM headers for dynamic curves will not gain automatic speed scaling from this unit.
Upgrade context
The fan replaces older sleeve-bearing or non-LED 120mm units that run louder or lack lighting. The jump is worth it when a build needs quieter 28 dBA acoustics, a 30,000-hour bearing life, and rainbow illumination without adding a separate LED strip. It does not suit setups requiring PWM control, higher static pressure, or speeds above 1100 RPM.
Kohokohdat
- Quiet cooling at 28 dBA for focused work
- Multi-layer LED lighting adds subtle colour to builds
- 1100 RPM delivers 50-55 CFM airflow through 11 blades
- Hydraulic bearing rated for 30000 hours of life
- 3-pin and 4-pin connectors fit most motherboards
Tekniset tiedot
| Brand | En-Labs |
|---|---|
| Model | 4LAYLED12025MX |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Compatibility | Case |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic |
| RPM | 1100 RPM ± 10% |
| Air Flow | 50-55 CFM |
| Noise Level | 28 dBA |
| Power Connector | 3 / 4 Pin |
| Color | Black |
| LED | Multi-Color |
| Features | This Computer Case Fan is the ideal solution for you to cool your device,offer great performance and add unique style to your computer cases. Multi-color and LED luminous silent cooling fan,with multi-lay light.It doesn't look dazzling. LED Hydraulic Bearing Case Fans 120mm x 120mm x 25mm, 11Blades Fan Speed 1100 RPM ± 10% Noise Level 28 dBA Power by motherboard 3pin or Molex 4pin 12 VDC Life Expectation: 30,000 Hours |
Tämän mallin muut versiot
3 lisää samasta mallistosta
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
EN-Labs
EN-Labs 4LAYLED12025BL 120 mm case fan Blue LED 1100 RPM 28 dBA
- Case Fan
- Case
10,99 $
0.00014369BTC
VarastossaKysymyksiä tästä tuotteesta
What do the 3-pin and 4-pin connectors on the EN-Labs 4LAYLED12025MX actually control?
The 3-pin connector supplies 12 V and a tachometer signal so the motherboard can monitor the 1100 RPM speed; the 4-pin Molex connector provides the same 12 V directly from the PSU without speed reporting.
How loud is 28 dBA from this 120 mm fan inside a typical case?
At 28 dBA the fan is barely audible over a quiet room; in a closed chassis it blends into background noise while still moving 50 to 55 CFM of air.
Does the 4-pin Molex connection limit the fan to a fixed 1100 RPM?
Yes — the Molex 4-pin supplies constant 12 VDC, so the fan runs at its rated 1100 RPM ± 10 % with no PWM speed control.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Black Box Corporation
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics
39,99 $
0.00052285BTC
Varastossa