Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

EN-Labs

EN-Labs 50pcs Silver 14x14x6mm Aluminum Heat Sink DIY Cooling

SKU CH-KCE4-5WEES

Pack of 50 silver aluminium heat sinks, each 14×14×6 mm, for chipset, power IC and LED cooling

  • ColorSilver
  • CompatibilityMotherboard Chipsets
  • MaterialAluminium
  • FeaturesWidely use for computer PC chipset, power IC, power electric
  • Dimensions14 x 14x 6mm
  • 50-piece pack covers multiple chips and boards
  • Aluminium construction draws heat away from ICs
  • Compact 14 x 14 x 6 mm footprint fits tight spaces
  • Light 100 g total weight adds minimal load
  • Adhesive mounting works without clips or screws

50-piece aluminium heatsink kit

This kit contains fifty silver-coloured aluminium heatsinks designed for DIY cooling of small electronic components. Each unit measures 14 x 14 x 6 mm and weighs approximately two grams. They suit motherboard chipsets, power ICs, LED modules and similar low-profile devices. Builders who need a large quantity of identical sinks for batch assembly or spares will find this pack convenient.

Capacity and thermal headroom

The 6 mm profile and 14 mm footprint provide modest surface area for passive heat spreading on low-power chips. They comfortably handle typical chipset or voltage-regulator loads in enclosed cases. High-wattage CPUs, discrete GPUs or power-stage components will exceed the dissipation capacity of these miniature sinks. Buyers targeting processor cooling or multi-watt power devices must look elsewhere.

Build integration

Installation requires thermal adhesive or epoxy, which is not supplied in the package. The flat base and square outline allow placement on standard chip packages without overhang. No mounting hardware, clips or fan provisions are included. The lightweight aluminium adds negligible mass to the board and leaves surrounding keep-out zones clear for other components.

Kohokohdat

  • 50-piece pack covers multiple chips and boards
  • Aluminium construction draws heat away from ICs
  • Compact 14 x 14 x 6 mm footprint fits tight spaces
  • Light 100 g total weight adds minimal load
  • Adhesive mounting works without clips or screws

Tekniset tiedot

ColorSilver
CompatibilityMotherboard Chipsets
MaterialAluminium
FeaturesWidely use for computer PC chipset, power IC, power electric device, LED light devices, etc.Use heatsink adhesive glue to install heatsink .(Glue is not included)Please check the specification table and make sure that the size of the heatsink fits that of your component.
Specification
Product Name : Heatsink
Material : Aluminium
Color : Silver Tone
Overall Size : 14 x 14x 6mm/ 0.55" x 0.55" x 0.24" (L*W*H)
Weight : 100g
Package Content : 50 x Heatsink
Dimensions14 x 14x 6mm

Kysymyksiä tästä tuotteesta

Will the 14x14x6mm size fit the chipset on my older motherboard?

Each heatsink measures 14 x 14 x 6 mm, so compare those dimensions with the chipset package you want to cool before purchasing.

How can I verify the 50 aluminium heatsinks are making proper contact after installation?

Apply thermal adhesive to each base, press firmly onto the target IC, and confirm temperatures drop under load using your monitoring software.

Does the pack include thermal adhesive or must I buy it separately?

The box contains 50 silver aluminium heatsinks only; thermal adhesive glue is not included and must be sourced separately.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.