Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

EN-Labs

EN-Labs M.2 2280 NVMe Heatsink with 2 Copper Pipes & 14.8 W/k Pads

SKU CH-7AZW-DY48R

Aluminium heatsink with two 6 mm copper heat pipes and 14.8 W/k thermal pads cools M.2 2280 SSDs by up to 10 °C

  • Keeps SSD up to 10 °C cooler with aluminum heatsink and copper pipes
  • Two 6 mm pure copper heat pipes transfer heat away from the drive
  • Includes two 14.8 W/k thermal silicone pads for optimal contact
  • Groove design increases surface area for efficient heat dissipation
  • Fits single-sided and double-sided M.2 2280 drives including PS5

M.2 2280 NVMe Heatsink with Copper Pipes

The EN-Labs aluminium heatsink fits the 2280 form factor and uses two 6 mm pure copper heat pipes. Two 14.8 W/k thermal silicone pads are included for direct contact with the controller and NAND. The grooved fin structure expands the dissipation area to lower drive temperatures by up to 10 °C.

Suits standard M.2 2280 SSDs.

Builders with a standard 2280 NVMe SSD gain a simple drop-in cooler that works on single-sided and double-sided boards. The kit is also listed as compatible with the PS5 expansion slot. Buyers using 2230, 2242 or 2260 length drives cannot mount this heatsink.

Thermal pads rated at 14.8 W/k

The included silicone pads provide a thermal conductivity of 14.8 W/k, which is the key figure that determines how efficiently heat moves from the SSD into the copper pipes and aluminium fins.

Kohokohdat

  • Keeps SSD up to 10 °C cooler with aluminum heatsink and copper pipes
  • Two 6 mm pure copper heat pipes transfer heat away from the drive
  • Includes two 14.8 W/k thermal silicone pads for optimal contact
  • Groove design increases surface area for efficient heat dissipation
  • Fits single-sided and double-sided M.2 2280 drives including PS5

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

How can I confirm the heatsink is lowering my SSD temperature by the claimed 10°C after installation?

Compare the SSD temperature in your BIOS or monitoring software before and after fitting the heatsink with the 14.8 W/k pads; a drop of up to 10°C indicates it is working as intended.

What components are included and what must I supply myself?

The package contains the aluminum heatsink, two 6 mm copper heat pipes and two 14.8 W/k thermal silicone pads; you only need to provide the M.2 2280 NVMe SSD.

Which version should I choose for a Samsung 970 EVO or a PS5?

This single model fits both single-sided and double-sided M.2 2280 drives, covering the Samsung 860 EVO, 960 EVO, 970 EVO, 970 Pro, 980 Pro and the PS5.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.