Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 120mm case fan with blue LED ring and anti-vibration pads

EN-Labs

EN-Labs SR12025BL 120mm Blue LED case fan

SKU CH-NXZ2-H04YS

A 120 mm sleeve-bearing case fan with blue LED light loop, 1200 RPM airflow up to 55 CFM and 15–20 dBA noise

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeSleeve
  • RPM1200RPM+/- 10%
  • Air Flow50-55 CFM
  • Noise Level15 - 20 dBA

LED Blue

  • Quiet operation at 16 dBA for low-noise builds
  • Blue Solar Eclipse light loop adds distinctive visual flair
  • Dual 3-pin and 4-pin Molex connectors fit most systems
  • 11 blades with frame cut-backs deliver up to 53 CFM airflow
  • Anti-vibration rubber pads reduce resonance in the chassis

120 mm Blue LED case fan

The EN-Labs SR12025BL is a 120 mm case fan built around a sleeve bearing and a blue LED light loop. It connects through both a 3-pin TX3 header and a Molex 4-pin connector for broad motherboard compatibility. The fan targets builders who want quiet airflow with a visible lighting accent inside the chassis.

50–55 CFM at 16 dBA

At 1200 RPM the fan delivers 50 to 55 CFM of airflow while producing 15 to 20 dBA of noise. The 11 vanes and cut-back frame profiling help move air through radiators or mesh panels. Static pressure reaches 1.073 mm H2O, so restrictive filters or dense fin stacks will reduce effective throughput.

Upgrade from stock 120 mm fans

Replacing basic bundled fans with this unit adds controllable speed, lower acoustic output and a blue LED ring without changing mounting points. The 3.6 W draw at 0.18 A keeps the load light on any fan header. Buyers who need higher static pressure for thick radiators or who prefer addressable RGB lighting should look elsewhere.

Kohokohdat

  • Quiet operation at 16 dBA for low-noise builds
  • Blue Solar Eclipse light loop adds distinctive visual flair
  • Dual 3-pin and 4-pin Molex connectors fit most systems
  • 11 blades with frame cut-backs deliver up to 53 CFM airflow
  • Anti-vibration rubber pads reduce resonance in the chassis

Tekniset tiedot

BrandEn-Labs
ModelSR12025BL
TypeCase Fan
CompatibilityCase
Bearing TypeSleeve
RPM1200RPM+/- 10%
Air Flow50-55 CFM
Noise Level15 - 20 dBA
Power Connectorcase fan TX3 3pin and molex 4pin
ColorBlack
LEDBlue
FeaturesFeature Solar Eclipse Serial 12CM 3pin case fan Solar Eclipse light loop design, create a very amazing effect Combination of high efficiency heat dissipation and mute,11pcs fan vanes,There is cut back processing on both external and internal of the fan frame to make a large amount of air and improve the heat transfer, 12CM STANDARD SIZE-Compatible with all types of chassis,Suitable for water cooling,Cold discharge light effect, CPU radiator, side through version of MOD light efficiency of fan position in cabinet,Different angles and light show different visual effects. Case fan power
Package Contentscase fan and screws

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the 1200 RPM speed and 3-pin connector let me control this fan on an older motherboard that only has 3-pin headers?

Yes, the fan runs at 1200 RPM ±10% and includes a 3-pin TX3 connector, so it will work on legacy 3-pin headers; speed control depends on your motherboard's voltage regulation capability.

How can I verify the fan is running at its rated 16 dBA noise level and 53.02 CFM airflow after installation?

Use a hardware monitoring tool to confirm the fan reports roughly 1200 RPM; at that speed the manufacturer rates noise at 16 dBA ±10% and airflow at 53.02 CFM with 1.073 mm/H₂O static pressure.

Does the box include the anti-vibration rubber pads and both power cables, or must I buy them separately?

The package contains the 120 mm fan, mounting screws, anti-vibration rubber pads, and both the 3-pin TX3 and Molex 4-pin power connectors — no extra parts are required.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.