Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 1U rackmount server chassis with front drive bays and ventilation slots

Enlight

Enlight EN-8970 1U rackmount server chassis 1.75 X 19 X 23

SKU CH-PSX7-EA6XN MPN EN-8970

1U rackmount chassis holds ATX boards, one 5.25" bay, two 3.5" bays and six 40mm fans

  • Chassis TypeRackmount
  • Form FactorRack-mountable
  • ColorBlack
  • Motherboard CompatibilityATX
  • External 5.25" Drive Bays1
  • External 3.5" Drive Bays2
  • Fits standard 19-inch racks with 1U height
  • Six 40mm fans provide active airflow
  • ATX motherboard support for flexible builds
  • 180W power supply included for immediate use
  • One 5.25-inch and one 3.5-inch external bay

1U Rackmount Chassis for ATX Systems

The Enlight EN-8970 is a 1U rackmount server chassis designed to hold an ATX motherboard in a standard 19-inch rack. It provides a compact black enclosure for dense compute deployments where space is limited. Builders needing deeper expansion slots or larger coolers should consider taller rack units instead.

Fixed 180 W Power Supply and 40 mm Cooling

A built-in 180 W supply powers the board and drives, leaving no room for a higher-wattage unit if components draw more. Six 40 mm fans move air through the shallow 1.75-inch height, but their small diameter can produce noticeable noise under load. The single 5.25-inch and single external 3.5-inch bay restrict removable media options.

Slide-in Installation with Cable Routing Limits

The chassis slides into a 19-inch rack on rails and secures with front-panel screws, so rack depth must accommodate the 23-inch length. ATX board mounting holes line up, yet the tight interior makes routing the 24-pin and CPU power cables difficult. Verify drive bay alignment before finalising the build.

Kohokohdat

  • Fits standard 19-inch racks with 1U height
  • Six 40mm fans provide active airflow
  • ATX motherboard support for flexible builds
  • 180W power supply included for immediate use
  • One 5.25-inch and one 3.5-inch external bay

Tekniset tiedot

BrandEnlight
Series1U
Chassis TypeRackmount
Form FactorRack-mountable
ColorBlack
Motherboard CompatibilityATX
External 5.25" Drive Bays1
External 3.5" Drive Bays2
40mm Fans6
Dimensions1.75 X 19 X 23
Weight22

Kysymyksiä tästä tuotteesta

Should I pick the single 5.25" bay or the 3.5" bay for my optical drive?

The chassis provides one external 5.25" bay, so an optical drive fits there; the two external 3.5" bays are sized for smaller drives.

What does the 180 W power supply actually run in a built server?

The included 180 W unit powers the motherboard, six 40 mm fans and the installed drives within the 1U height limit.

How does the 1U rackmount form factor limit expansion cards?

At 1.75 inches tall the case only accepts low-profile cards that fit the 1U rack unit.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.