Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
EVGA GeForce GTX 1080 Ti FTW3 Hybrid graphics card with 120mm radiator and fan

EVGA

EVGA GeForce GTX 1080 Ti FTW3 Hybrid graphics card

SKU CH-7V68-CSM1M

Hybrid water-cooled GTX graphics card with 11GB GDDR5X, 1569 MHz base and 1683 MHz boost clocks, plus a 120mm radiator that runs 20 to 30C cooler

  • Boost clock hits 1683 MHz for high frame rates
  • 11 GB GDDR5X memory handles large textures
  • Hybrid cooler drops GPU temperature 20 to 30 °C
  • 120 mm radiator and fan install without tubing or filling
  • Nine extra sensors give detailed thermal data via Precision XOC

GTX 1080 Ti FTW3 Hybrid graphics card

The EVGA GeForce GTX 1080 Ti FTW3 Hybrid is a high-performance GPU built for enthusiasts who want factory-integrated liquid cooling. It targets users running demanding workloads at high resolutions without the complexity of a custom loop. The card arrives ready to install with a self-contained thermal solution.

11 GB GDDR5X capacity and thermal headroom

The card provides 11264 MB of GDDR5X memory paired with a real base clock of 1569 MHz and a real boost clock of 1683 MHz. This configuration handles 4K gaming and heavy compute tasks while the hybrid cooler keeps the GPU 20 to 30 C cooler than air-only designs. Memory and VRM temperatures remain controlled under sustained load.

iCX sensors and Precision XOC software

Nine additional temperature sensors embedded on the PCB feed live data to EVGA Precision XOC for per-component monitoring. The software enables targeted fan curves and voltage adjustments based on VRAM and VRM readings, not just the core. This visibility supports safer overclocking and early detection of thermal bottlenecks.

Kohokohdat

  • Boost clock hits 1683 MHz for high frame rates
  • 11 GB GDDR5X memory handles large textures
  • Hybrid cooler drops GPU temperature 20 to 30 °C
  • 120 mm radiator and fan install without tubing or filling
  • Nine extra sensors give detailed thermal data via Precision XOC

Tekniset tiedot

BrandEVGA

Kysymyksiä tästä tuotteesta

Will the 120 mm radiator fit in a case built for older air-cooled cards?

The self-contained 120 mm radiator and fan mount in standard 120 mm fan locations, so most cases that accept a rear or top 120 mm fan will accommodate it without custom tubing.

How can I verify the iCX sensors are reporting temperatures correctly after installation?

Open EVGA Precision XOC; it reads all nine additional PCB sensors plus the GPU core, letting you confirm each zone reports realistic idle and load values.

Does the box include the hybrid cooler and radiator, or must I buy the water block separately?

The hybrid cooler, 120 mm radiator and fan ship pre-assembled in the box — no separate water block, tubing or coolant purchase is required.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.