Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Square black 60×60×15mm axial fan with seven blades and four mounting holes

Fans

Fans 2406GL-04W-B39Size 60×60×15mm 12V 0.18A 3800rpm case fan

SKU CH-HAN9-WN4G3 MPN 2406GL-04W-B39Size

A 60 × 60 × 15 mm axial case fan running at 3800 rpm on 12 V DC with a 0.18 A draw

  • Runs on 12 V DC for standard PC compatibility
  • Spins at 3800 rpm to move air through tight spaces
  • Draws only 0.18 A keeping power use low
  • Fits 60 × 60 × 15 mm slots in compact builds
  • Weighs 40 g for minimal load on the chassis

Compact axial case fan

The NMB 2406GL-04W-B39 is a 60 × 60 × 15 mm axial fan designed for tight chassis where installation depth is limited. It runs on 12 V DC with a 7.0 V to 13.6 V operating range and draws 0.18 A. The unit weighs 40 g and suits industrial, medical or embedded systems that need directed airflow.

Sustained airflow at rated speed

At the rated 3800 r.p.m. the fan delivers continuous air exchange without the speed drop that occurs in short bursts. Axial geometry keeps noise low while maintaining efficiency across the full voltage range. The motor is built for long-term operation in equipment such as rail vehicles, hotel systems and new-energy platforms.

12 V 0.18 A power profile

The single specification that decides fit is the 12 V DC input with 0.18 A current draw; verify that your header or supply matches this exactly. The 7.0 V to 13.6 V range allows some headroom but the connector and pin-out must align with the 2406GL series. Buyers who need a different voltage or current rating should look elsewhere.

Kohokohdat

  • Runs on 12 V DC for standard PC compatibility
  • Spins at 3800 rpm to move air through tight spaces
  • Draws only 0.18 A keeping power use low
  • Fits 60 × 60 × 15 mm slots in compact builds
  • Weighs 40 g for minimal load on the chassis

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

How much noise and heat does the 3800 rpm 12 V fan produce when running continuously?

The 60 × 60 × 15 mm axial fan is rated at 3800 rpm with a 0.18 A draw at 12 V. NMB specifies low noise level and exceptional efficiency for continuous air exchange in tight spaces.

What connector or mounting hardware must I already have to install this 60 × 60 mm fan?

The fan measures 60 × 60 × 15 mm with standard square frame mounting holes. You will need a compatible 60 mm fan header or adapter and four mounting screws for your case or heatsink.

Will this 12 V 0.18 A fan work alongside older 7 V to 13.6 V components in the same loop?

The voltage range is DC 7.0 V to 13.6 V, so it shares the same operating window as many legacy 12 V parts. Match the connector pinout and ensure the header can supply 0.18 A per fan.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.