Fans
Fans AD0612HB-C76GL 60x60x20mm case fan
A 60 mm square DC 12 V case fan spinning at 5100 RPM with double ball bearings for 18.93 CFM airflow at 35.5 dB(A)
- 12 V DC power draws only 1.92 W for efficient cooling
- 5100 RPM delivers 18.93 CFM airflow across components
- Double ball bearing ensures long life at 35.5 dBA
- Compact 60×60×20 mm frame fits tight chassis spaces
- Light 49.0 g weight adds minimal load to builds
60 mm 12 V Double Ball Bearing Fan
This 60 mm square axial fan runs on 12 V DC and draws 0.16 A for 1.92 W of power. Double ball bearings support a 5100 RPM speed that delivers 18.93 CFM airflow at 4.06 mm static pressure. Acoustic output is rated at 35.5 dB(A) and the unit weighs 49.0 g.
Fits Tight 12 V Cooling Slots — Not for Variable
The fixed 12 V supply and single-speed 5100 RPM design suit enclosures that need constant high airflow in a 60 mm frame. Builders who require PWM control, lower noise floors or larger frame sizes should consider alternative models.
5100 RPM Fixed Speed Decides Fit
The constant 5100 RPM rating determines whether this fan meets the thermal and acoustic targets of the intended chassis. Verify that the system can accommodate the fixed airflow and noise level before purchase.
Kohokohdat
- 12 V DC power draws only 1.92 W for efficient cooling
- 5100 RPM delivers 18.93 CFM airflow across components
- Double ball bearing ensures long life at 35.5 dBA
- Compact 60×60×20 mm frame fits tight chassis spaces
- Light 49.0 g weight adds minimal load to builds
Tekniset tiedot
Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.
Kysymyksiä tästä tuotteesta
How do I mount the AD0612HB-C76GL in a 60 mm fan slot and what step do people miss?
Align the four screw holes on the 60 mm frame with the case or heatsink mounts, insert 60 mm fan screws through the frame into the threaded holes, and tighten evenly; the step often missed is checking that the airflow arrow on the fan side points toward the component you want to cool.
What maintenance or replacement will the double ball bearing need later?
The double ball bearing is sealed and rated for continuous operation at 5100 RPM; no lubrication is required, but if noise rises above the specified 35.5 dB/A or rotation becomes rough after extended use, replace the entire fan unit.
At what point does the 12 V 0.16 A motor hit its thermal limit under sustained load?
The motor draws 1.92 W at 12 V and 0.16 A; under sustained load the first limit reached is the bearing temperature ceiling, which typically appears as a gradual RPM drop from 5100 RPM or an increase in noise beyond 35.5 dB/A before any electronic protection activates.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Black Box Corporation
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics
39,99 $
0.00049678BTC
Varastossa