Fans
Fans FFB0812EHESize 80x80x38mm 12V 1.35A 4500 RPM 100 CFM case fan
An 80 mm axial case fan moves 100 CFM at 4500 RPM with 7.8 mmH₂O pressure and 40 dBA noise on 12 V power
- Delivers 100 CFM airflow for effective component cooling
- Spins at 4500 RPM to move high air volume
- Operates at 40 dBA noise level for quieter performance
- Generates 7.8 mmH2O static pressure for restricted airflow paths
- Draws 1.35 A at 12 V consuming 16.2 W power
Delta FFB0812EHE 80mm 12V case fan
This Delta axial fan measures 80 by 80 by 38 millimetres and runs on 12 volts at 1.35 amperes. It spins at 4500 RPM with a tolerance of plus or minus ten percent and draws 16.2 watts. The unit delivers 100 CFM of air volume and 7.8 mmH2O of static pressure at a noise level of 40 dBA.
High airflow cooling for tight spaces
Builders who need strong forced convection through a heat exchanger or power supply in a shallow bay will benefit from the 11 metres per second wind speed and compact 38 millimetre depth. Buyers who require a quieter profile below 40 dBA or a larger frame size should look at alternative options.
100 CFM at 4500 RPM decides fit
The single figure that determines whether this part matches the thermal load is the 100 CFM rating at the rated 4500 RPM speed. If the target chassis or radiator demands significantly more or less airflow, a different specification is required.
Kohokohdat
- Delivers 100 CFM airflow for effective component cooling
- Spins at 4500 RPM to move high air volume
- Operates at 40 dBA noise level for quieter performance
- Generates 7.8 mmH2O static pressure for restricted airflow paths
- Draws 1.35 A at 12 V consuming 16.2 W power
Tekniset tiedot
Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.
Kysymyksiä tästä tuotteesta
How do I install the Delta FFB0812EHE 80 mm fan in a standard case fan mount?
Mount the 80 x 80 mm frame using four screws through the corner holes; the 38 mm thickness fits most 80 mm mounts, but verify clearance against nearby components before tightening.
What maintenance will the FFB0812EHE fan need over time?
Periodically clean dust from the blades and intake area with compressed air; the sealed motor bearings are not user-serviceable, so replace the unit if noise or vibration increases beyond the rated 40 dBA.
Which limit appears first when the fan runs continuously at 4500 RPM?
The 16.2 W power draw and 1.35 A current at 12 V set the thermal ceiling; sustained operation at 4500 RPM ± 10 % will hit the motor’s temperature limit before airflow drops below 100 CFM.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics



