Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Enclosed metal-frame 3D printer with four independent extruders and a flexible PEI build plate

Flashforge

Flashforge Creator 5 Pro 4-Nozzle 3D Printer 256mm

SKU CH-67KV-CFQB9

Enclosed FDM printer with four independent nozzles, active 65 °C chamber heating, HEPA13 filtration and 600 mm/s CoreXY speed for 256 mm multicolor builds

  • Type3D Printer
  • Number of Extruders4
  • Body MaterialMetal
  • TechnologyFDM (Fused Deposition Modeling)
  • Build MaterialPLA, PETG, TPU-95A, TPU-64D, PLA-CF, PETG-CF, SILK, PVA, BVO
  • Build Size256*256*256mm

Model C5 Pro

  • C5
  • C5 Pro
  • Print flawless multicolor parts with four independent nozzles eliminating waste
  • Heat chamber to 65°C for warp-free ABS and ASA while HEPA13 filters 99.97% particles
  • CoreXY motion with vibration compensation delivers 600mm/s speed on 256mm build volume
  • Auto bed leveling plus XYZ offset and filament monitoring lets you start printing immediately
  • Swap nozzles in seconds and pop prints off the flexible PEI plate for minimal downtime

Multicolor 3D printing with four independent nozzles

The Creator 5 Pro uses four dedicated extruders to produce multicolor and multi-material parts without purging waste or risking color contamination. Each nozzle handles a separate filament path so you can combine rigid, flexible and support materials in a single build. The enclosed CoreXY frame reaches 600mm/s while vibration compensation keeps dimensional accuracy across the full 256mm cube.

Active heating, HEPA13 filtration

The chamber heats from ambient up to 65°C to prevent warping on ABS, ASA and PA-based filaments, while adaptive cooling allows closed-door printing for PLA, TPU, PETG and PLA-CF. A HEPA13 filter captures 99.97% of airborne particles for safer office or home use. The bundled Flash Studio slicer manages multi-extruder toolpaths, remote monitoring and print-queue organisation from one dashboard.

Check filament compatibility.

Verify that your chosen materials appear in the supported list — PLA, PETG, TPU-95A, TPU-64D, carbon-fibre composites, PVA, BVOH, ABS, ASA, PA-CF, PET-CF, PAHT-CF, ASA-CF, ASA-GF, ABS-GF, PPA-CF, PPS-CF and HIPS — and that you have 1.75mm spools. Confirm the four nozzle diameters match the detail level you need. Ensure your network allows the printer to reach the remote-management dashboard for multi-unit control.

Kohokohdat

  • Print flawless multicolor parts with four independent nozzles eliminating waste
  • Heat chamber to 65°C for warp-free ABS and ASA while HEPA13 filters 99.97% particles
  • CoreXY motion with vibration compensation delivers 600mm/s speed on 256mm build volume
  • Auto bed leveling plus XYZ offset and filament monitoring lets you start printing immediately
  • Swap nozzles in seconds and pop prints off the flexible PEI plate for minimal downtime

Tekniset tiedot

BrandFlashForge
ModelCreator 5 Pro
Type3D Printer
Number of Extruders4
Body MaterialMetal
TechnologyFDM (Fused Deposition Modeling)
Build MaterialPLA, PETG, TPU-95A, TPU-64D, PLA-CF, PETG-CF, SILK, PVA, BVOH
ABS, ASA , PA-CF, PET-CF, PAHT-CF, ASA-CF, ASA-GF, ABS-GF, PPA-CF, PPS-CF, HIPS
Build Size256*256*256mm
Layer Thickness100 microns
Filament Diameter1.75mm
Software BundleFlash Studio

Tämän mallin muut versiot

1 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How often do the four independent nozzles need to be swapped and is the PEI flex plate user-replaceable?

Nozzles can be swapped in seconds and the flexible PEI build plate is designed for easy removal of finished models, so both are user-replaceable with minimal downtime.

What limits continuous high-speed printing at 600mm/s before vibration compensation or chamber heat becomes the bottleneck?

CoreXY architecture with vibration compensation and active chamber heating up to 65°C work together to sustain rapid, precise fabrication across the 256x256x256mm build volume.

How loud is the printer and what are the heat and filtration levels when running all day with the enclosure closed?

HEPA13 filtration captures 99.97% of particles while adaptive cooling enables closed-door printing for PLA, TPU and PETG, and active heating maintains up to 65°C for ABS, ASA and PA materials.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.