Fractal Design Epoch White FD-C-EPO1A-03 ATX Mid Tower PC Case
- ATX Mid Tower
- White
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Fractal Design
Mid-tower ATX case with mesh front, tempered glass side panel, three pre-installed 120 mm fans and room for 372 mm graphics cards
Options Black / Light Tint Tempered Glass / RGB
The Fractal Design Epoch is a steel ATX mid-tower finished in black with a light-tint tempered glass side panel. It accepts ATX and Mini-ITX motherboards and ships without a power supply, which mounts at the bottom. Three Momentum 12 PWM fans are pre-installed at the front.
With the three included 120 mm front fans fitted the case fits graphics cards up to 372 mm long. If a front radiator is mounted instead the maximum drops to 345 mm. CPU air coolers up to 170 mm tall are supported and the top panel takes radiators up to 240 mm.
The bundled Momentum 12 fans use LCP blades and fluid-dynamic bearings for quieter airflow. Front, top and side panels all remove without tools — the front pulls off and the top slides via a fabric tab — while the interior provides three 3.5-inch and two 2.5-inch drive bays.
| Brand | Fractal Design |
|---|---|
| Series | Epoch |
| Model | FD-C-EPO1A-04 |
| Type | ATX Mid Tower |
| Color | Black |
| Case Material | Steel |
| With Power Supply | No |
| Power Supply Mounted | Bottom |
| Motherboard Compatibility | ATX / Mini ITX |
| Side Panel | Tempered Glass Panel |
| LED | No |
| Internal 3.5" Drive Bays | 3 |
| Internal 2.5" Drive Bays | 2 |
| Expansion Slots | 7 |
| Fan Options | Total fan mounts: 6x 120 mm or 4x 140 mm Front: 3x 120/140 mm (3 x 120 mm Momentum PWM included) Top: 2x 120/140 mm Rear: 1x 120 mm |
| Pre-installed Fans | Front - 3 x 120mm |
| Radiator Options | Front: Up to 280/360 mm Top: Up to 240 mm Rear: 120 mm |
| Max GPU Length | "Up to 372 mm with front fan mounted or up to 345 mm with front-mounted radiator" |
| Max CPU Cooler Height | 170 mm |
| Max PSU Length | "1 HDD tray: 255 mm max 2 HDD tray: 155 mm max" |
| Dimensions | 17.6" x 8.46" x 18.46" |
| Lähetyspaino | 9.55 kg |
| Pakkauksen mitat | 564 × 559 × 330 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
With the three pre-installed 120 mm fans in place, the case accepts graphics cards up to 372 mm long. If you later swap the front fans for a radiator, the limit drops to 345 mm.
The front mounts radiators up to 360 mm. The top panel is capped at 240 mm, so a 360 mm AIO can only go in the front.
With one 3.5-inch tray fitted the PSU can be 255 mm long; with both trays installed the maximum drops to 155 mm.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?