Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black mid-tower case with three dark semi-transparent tempered glass panels and four ARGB fans visible

FSP

FSP CMT510 Plus ATX Mid Tower PC Case

SKU CH-GYFY-9WZ1W

ATX mid-tower case with three semi-transparent tempered glass panels, four pre-installed 120mm addressable RGB fans, 20 lighting modes, front 360mm radiator support, and room for 400mm graphics cards

  • TypeATX Mid Tower
  • ColorBlack
  • Case MaterialSECC, Tempered Glass
  • With Power SupplyNo
  • Motherboard CompatibilityATX / Micro ATX / Mini ITX
  • Side Panelwith Side Window

Options CMT510 Plus

  • 3 semi-transparent tempered glass panels showcase internal components
  • 4 pre-installed 120mm ARGB fans with built-in controller for 20 lighting modes
  • Supports 360mm front radiator and 400mm graphics cards for high-performance builds
  • 2 USB 3.0 front ports plus 2 x 3.5" and 2 x 2.5" drive bays for versatile connectivity
  • 30mm high feet and PSU dust cover improve airflow and protect hardware

FSP CMT510 Plus ATX Mid Tower

The FSP CMT510 Plus is a black ATX mid tower case built from SECC steel and tempered glass. It arrives with four pre-installed 120mm ARGB fans and a built-in controller that offers 20 lighting modes. Three semi-transparent glass panels reveal the interior while the front I/O provides two USB 3.0 ports and audio jacks.

Builders who want integrated lighting control

This case suits builders who want addressable RGB lighting managed through a 5V motherboard header or the included hub without buying extra fans. It is not for systems that need more than two 3.5-inch drive bays or more than two 2.5-inch bays. Buyers requiring front-panel USB 3.1 or USB-C connectivity should look elsewhere.

Component clearance and cooling headroom

The chassis fits graphics cards up to 400mm long and CPU coolers up to 165mm tall. A 360mm radiator can be mounted in the front while the top supports either a 120mm or 140mm unit. Seven expansion slots give room for full-length add-in cards. Storage capacity tops out at two 3.5-inch and two 2.5-inch drives.

Kohokohdat

  • 3 semi-transparent tempered glass panels showcase internal components
  • 4 pre-installed 120mm ARGB fans with built-in controller for 20 lighting modes
  • Supports 360mm front radiator and 400mm graphics cards for high-performance builds
  • 2 USB 3.0 front ports plus 2 x 3.5" and 2 x 2.5" drive bays for versatile connectivity
  • 30mm high feet and PSU dust cover improve airflow and protect hardware

Tekniset tiedot

BrandFSP
SeriesCMT510
ModelCMT510 Plus
TypeATX Mid Tower
ColorBlack
Case MaterialSECC, Tempered Glass
With Power SupplyNo
Motherboard CompatibilityATX / Micro ATX / Mini ITX
Side Panelwith Side Window
LEDAddressable RGB
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays2
Expansion Slots7
Front PortsUSB 3.0 x2, Audio, Microphone
Fan OptionsFront - 2 x 140mm / Front - 3 x 120mm / Rear - 1 x 120mm / Top - 1 x 120mm / Top - 1 x 140mm
Radiator OptionsFront - Up to 360mm
120mm FansFront: 120 mm x3 ARGB Led Fan
Rear: 120 mm ARGB Led Fan
Max GPU Length400 mm
Max CPU Cooler Height165 mm
Max PSU LengthATX Power Supply
Dimensions491 x 208 x 448 mm

Tämän mallin muut versiot

1 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What motherboard form factors does the CMT510 Plus support so I know if my current board fits?

The case accepts ATX, Micro-ATX and Mini-ITX motherboards, covering the three most common desktop form factors.

Will my existing 360 mm radiator fit in the front of this case?

Yes, the front panel is rated for radiators up to 360 mm, so a standard 360 mm AIO will mount without modification.

How can I verify the four pre-installed ARGB fans are running in sync after I build the system?

Connect the included hub to a 5 V addressable RGB header on the motherboard, then use the board software or the hub's 20 built-in modes to confirm all four 120 mm fans display the same pattern.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.