Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Fujitsu

Fujitsu CA06550-B200 147GB 10000RPM SCSI 3.5Inch internal hard drive

SKU CH-1X6E-VWMQS

A 147 GB SCSI hard drive spinning at 10000 RPM in a 3.5 inch form factor for desktop storage

  • NAND Flash Memory TypeSLC
  • 147 GB capacity stores critical datasets
  • 10 000 RPM spindle speed accelerates data access
  • 5 inch form factor fits standard desktop bays
  • SLC NAND flash memory enhances endurance

Fujitsu 147GB 10000RPM SCSI Drive

The Fujitsu CA06550-B200 is a new 3.5-inch internal hard drive with a 147GB capacity and a 10000RPM spindle speed. It uses a SCSI interface and features SLC NAND flash memory. This desktop component is suited for legacy servers or workstations requiring this specific connection type.

Suits SCSI Systems Only

This drive fits systems built around a SCSI bus and 3.5-inch bays. It is not suitable for platforms lacking a native SCSI controller or the correct physical mounting points. Buyers needing larger capacities or different interface standards should consider other storage options.

Kohokohdat

  • 147 GB capacity stores critical datasets
  • 10 000 RPM spindle speed accelerates data access
  • 5 inch form factor fits standard desktop bays
  • SLC NAND flash memory enhances endurance

Tekniset tiedot

NAND Flash Memory TypeSLC

Kysymyksiä tästä tuotteesta

What size drive bay does the 3.5-inch Fujitsu CA06550-B200 need?

The drive is built to the 3.5-inch form factor, so it fits a standard 3.5-inch internal bay in a desktop chassis or server enclosure.

How is the SCSI drive installed, and what step is often missed?

Connect the SCSI data cable and power connector, then set a unique SCSI ID using the jumper block on the drive; forgetting to change the default ID is the most common mistake.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.