G.SKILL F5-6000J3238F16GX2-RS5W 32GB DDR5 6000 CL32 desktop RAM
- 32GB (2 x 16GB)
- 288-Pin PC RAM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
G.SKILL
Dual-channel 64 GB DDR5 kit with two 32 GB modules at 5600 MT/s, CL36 timing and a low-profile 33 mm heat spreader
Capacity 64GB (2 x 32GB)
Speed DDR5 5600 (PC5 44800)
This is a 64GB DDR5 kit built from two 32GB unbuffered modules for desktop PCs. It targets DIY builders and enthusiasts who need high-capacity memory for demanding workloads or gaming rigs running on compatible Intel platforms.
The low-profile 33mm height clears most large CPU coolers and fits compact cases, but verify cooler clearance before buying. The kit boots at SPD defaults and activates its rated DDR5 5600 CL36 timings through an Intel XMP 3.0 profile enabled in the BIOS.
The dual-channel kit suits Intel 600-series chipsets such as Z690 and B660 and is also validated for Z590 platforms. Users on unsupported chipsets, those requiring ECC or registered memory, or builds needing speeds beyond 5600 should consider other options.
| Brand | G.SKILL |
|---|---|
| Series | Ripjaws S5 Series |
| Model | F5-5600J3636D32GX2-RS5K |
| Capacity | 64GB (2 x 32GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL36 |
| Timing | 36-36-36-89 |
| Voltage | 1.25V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 |
| Color | Black |
| Heat Spreader | Yes |
| Features | "Performance DDR5 memory designed for DIY and PC enthusiasts. Featuring a 33mm Low-profile module height design Intel XMP 3.0 Support. The memory kit will boot at the SPD speed when BIOS settings are at default. For best results, please use memory modules from the same memory kit only. Please do not install memory modules from different kits, as it may result in system stability issues. Enable XMP profile in the BIOS to reach up to the rated XMP overclock speed of the memory kit. Reaching the rated XMP overclock speed and system stability depends on the capability of the motherboard |
| Recommend Use | High Performance or Gaming Memory / Intel 600 Series / Intel B660 / Intel Compatible / Intel Z590 / Intel Z690 |
| Lähetyspaino | 0.12 kg |
| Pakkauksen mitat | 216 × 140 × 16 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Enter the BIOS, enable the Intel XMP 3.0 profile, save and reboot; then check the memory tab or a tool such as CPU-Z to see the DRAM frequency reading 5600 MT/s with timings 36-36-36-89.
The package contains two 32 GB DDR5 modules with black aluminum heatspreaders; no extra cables or accessories are needed, just a motherboard with 288-pin DDR5 slots.
This model is the 64 GB kit (2 x 32 GB) and is the only version listed under this part number; choose it when you want a matched dual-channel pair totalling 64 GB.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?