BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.002786BTC
Varastossa
G.SKILL
G.SKILL F5-6000R3036G48GQ4-G5 192GB (4×48GB) DDR5 6000 CL30 ECC Registered Server RAM
192 GB quad-channel DDR5 RDIMM kit with ECC, registered buffering, CL30 timing and Intel XMP 3.0 support for Xeon W-2400X workstations
- Capacity192GB (4 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6000 (PC5 48000)
- CAS LatencyCL30
- Timing30-36-36-96
- Voltage1.40V
- 192 GB quad-channel capacity for heavy workloads
- DDR5 6000 speed with CL30 latency for fast response
- ECC registered design protects data integrity
- Intel XMP 3.0 profile enables one-click overclock
- Hand-screened ICs tested for stability under load
Capacity and target workloads
This 192GB quad-channel DDR5 kit uses four 48GB registered DIMMs with ECC for data integrity. It is built for Intel Xeon W-2400X series workstations on W790 motherboards that support four-channel memory. Buyers who need consumer DIMMs or non-ECC memory cannot use this kit.
Installation requirements
Modules are 288-pin RDIMMs that require a W790 chipset board with four populated channels and a CPU IMC capable of DDR5 6000 via Intel XMP 3.0. The rated speed and stability depend on motherboard QVL validation and silicon quality. Systems without registered-DIMM support or quad-channel wiring will not boot.
Sustained-load behaviour
Rated at CL30-36-36-96 and 1.40V, the kit delivers PC5-48000 bandwidth with on-die and side-band ECC active. A dedicated temperature sensor allows the platform to monitor thermals during extended rendering or compute sessions. No heat spreader is fitted, so chassis airflow must handle the thermal load.
Kohokohdat
- 192 GB quad-channel capacity for heavy workloads
- DDR5 6000 speed with CL30 latency for fast response
- ECC registered design protects data integrity
- Intel XMP 3.0 profile enables one-click overclock
- Hand-screened ICs tested for stability under load
Tekniset tiedot
| Brand | G.SKILL |
|---|---|
| Series | G5 Series |
| Model | F5-6000R3036G48GQ4-G5 |
| Capacity | 192GB (4 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6000 (PC5 48000) |
| CAS Latency | CL30 |
| Timing | 30-36-36-96 |
| Voltage | 1.40V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Multi-channel Kit | Quad Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 |
| Chipset | Intel W790 Series Chipset (w/ Quad-Channel Memory Support) |
| Heat Spreader | No |
| Features | High performance DDR5 R-DIMM memory kit Optimized for Intel Xeon W-2400X series processors Requires compatible Intel W790 chipset motherboard w/ 4-channel support On-die ECC & side-band ECC Dedicated temperature sensors Intel XMP 3.0 Support |
| Lähetyspaino | 0.12 kg |
| Pakkauksen mitat | 244 × 178 × 25 mm |
Kysymyksiä tästä tuotteesta
How do I confirm the kit runs at DDR5 6000 CL30 after enabling XMP 3.0?
Enable the Intel XMP 3.0 profile in BIOS, then verify the operating frequency reads 6000 MT/s and timings show 30-36-36-96 at 1.40V using CPU-Z or the motherboard firmware monitor.
What ships in the box and what must I source separately?
The package contains four 48 GB DDR5 288-pin RDIMMs for a total of 192 GB; a compatible Intel W790 motherboard with quad-channel support and a Xeon W-2400X series processor are required but not included.
Which capacity version should I choose for a quad-channel workstation build?
This F5-6000R3036G48GQ4-G5 kit provides four 48 GB modules, delivering 192 GB across four channels — select it when your workload needs maximum registered ECC capacity at DDR5 6000 CL30.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 $
0.00281192BTC
Varastossa
